User manual AMERICAN AUDIO PRO-DJ1S

[. . . ] PRO-DJ1 Front load professional single CD player Featuring: Fader "Q" Start, Flip Flop and Digital Output PRO-DJ1 +10 © American DJ® AUDIO Los Angeles, CA 90058 USA IMPORTANT SAFETY ITEMS FOR U. S. A. & CANADA MODEL ONLY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO WATER OR MOISTURE. NOTE: This CD player uses a semiconductor laser. It is recommended for use in a room at the following temperature: 41°F - 95°F / 5°C - 35°C CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE CAREFULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: 1. Do not damage or deform; it may cause electric shock or malfunction when used. [. . . ] The IN BUTTON (3) LED will light (figure 11). (3) Press OUT BUTTON (2) to set desired ending point of the LOOP. You will know you are in LOOP mode because IN BUTTON (3) and OUT BUTTON (2) LEDs will light and flash. LOOP INDICATOR (29) in LCD DISPLAY (13) will also flash (see figure 14). (4) To exit the LOOP, press the OUT BUTTON (2). Music will resume normal play (figure 13). (5) To replay loop, press the RELOOP BUTTON (30). · 8. 9. 10. 11. NOTE: When play starts via pause or track skipping or scanning, the CUE POINT will change to the start point automatically. LOOP INDICATOR (29) in LCD DISPLAY (13) will all begin flashing again (figure 14). fig. EDITING A LOOP: NOTE: YOU CAN ONLY EDIT THE ENDING PART OF THE LOOP. If a LOOP has not been created, follow instructions in step 11 for creating a LOOP. If a LOOP has already been created and you wish to edit it, press RELOOP BUTTON (12) to reenter the LOOP mode (figure 14). (2) Next, press OUT BUTTON (2) to return to normal play (figure 13). (3) Press OUT BUTTON (2) again for new desired ending point of the loop (figure 13). - FOR SHORTER LOOP: press OUT BUTTON (2) quickly. - FOR LONGER LOOP: Wait until the song plays several frames, them press OUT BUTTON (2). TIME DISPLAY · During normal play, each time you press the TIME BUTTON (16), the display changes to give you the following information (see figure 1, LCD screen). (1) ELAPSED playing time (2) REMAINING time of a track. If the current track number is over 34, ". . . . . . . . . . . . . . . . . . . " is displayed. (3) TOTAL remaining time of the disc. American DJ® AUDIO · PRO-DJ1 INSTRUCTIONS MANUAL · PAGE 8 BASIC OPERATIONS (CONT. ) 14. PITCH BENDING · The speed increases or decreases respectively when the (+) PITCH BEND BUTTON (14) or PITCH BEND (-) BUTTON (14) is pressed. The extent to which the speed changes is proportionate to the amount of time the button is pressed. [. . . ] 4 lines CD, tape etc. ; or 2 lines CD, tape etc. (24) REC OUT - Connect to your record unit. The REC OUT level is not influenced by the master control (17). (25) MASTER OUT - Parallel output of P. A. [. . . ]