User manual AMERICAN AUDIO Q-D5 MK2

[. . . ] Q-D5 MKII TM Professional Preamp Mixer American Audio Rev. 90040 www. AmericanAudio. us Q-D5 MKIITM Unpacking Every Q-D5 MKIITM has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment necessary to operate the mixer has arrived intact. [. . . ] Turn the knob in a clockwise direction to increase the headphone volume. ChanneL eQUaLIzer ("rOtarY kILLs" - bass/MID/trebLe COntrOL) - All of the channels include a three-band signal EQ. These controls are used to increase or decrease the LOW's, MID's, and HI's of the output signal. CHANNEL trEbLE CoNtroL - This knob is used to adjust the treble levels of a channel allowing for a maximum treble gain of 15dB or maximum decrease of -30dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble applied to a channel signal, turning the knob in a clockwise direction will increase the amount of treble applied to a channel signal. CHANNEL MIDrANgE CoNtroL - This knob is used to adjust the midrange levels of a channel allowing for a maximum midrange gain of 15dB or maximum decrease of -30dB. Turning the knob in a counter-clockwise direction will decrease the amount of midrange applied to a channel signal, turning the knob in a clockwise direction will increase the amount of midrange applied to a channel signal. CHANNEL bASS CoNtroL - This knob is used to adjust the low frequency levels of a channel allowing for a maximum bass gain of 15dB or maximum signal decrease of -30dB. Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to a channel signal, turning the knob in a clockwise direction will increase the amount of bass applied to a channel signal. db Meter MODe seLeCtOr - This push button switch is used to change the operating mode of the dB LED meter. When the switch is in the Master L/R (up) position, the dB meter will indicate the master output levels. When the switch is in the PFL CH1/CH2 (down) position the dB meter will use the left side of the meter to indicate channel one's prefader level and use the right side of the meter to indicate channel two's prefader level. Q-start On/OFF sWItCh - This function works in conjunction with a compatible American Audio® or American DJ® "Q" Start CD player. When used with a compatible CD player, you can use the crossfader to start and stop the CD play. The ON/OFF "Q" START switch activates the fader "Q" start feature. When the fader "Q" start feature is activated sliding the CROSSFAdER (1) from left to right will play or cue any CD player connected to the CONTROLLER jACKS (19) on the rear of the unit. For example, connect a compatible dual CD player connect to mixer channels one and two (refer to your CD player manual for proper set-up). Be sure the Fader "Q" Start feature is activated on both channels. Slide the crossfader to the channel one position (full left) and begin playback on CD drive one. Slide the crossfader to the channel position (far right). This will immediately trigger the play function on CD drive two and return CD drive one to cue mode. To return to normal fader operation turn the Fader "Q" Start ON/OFF SWITCH to the OFF position. ©American Audio® - www. AmericanAudio. us - Q-D5 MKIITM Instruction Manual Page 7 Q-D5 MKIITM Controls and Features Cont. 17 18 19 20 21 AC IN- PLAYER CONTROL B A LIGHT CONTROL MIC OUTPUT L CH-2 CH-1 GND GND R MASTER REC LINE 2 PHONO 2 AUX 2 AUX 2 PHONO 2 LINE 1 PHONO 1 AUX 1 AUX 1 PHONO 1 22 23 24 25 26 27 28 29 30 17. [. . . ] number by contacting customer support at (800) 322-6337. Q-D5 MKIITM Warranty 1-YEAr LIMItED WArrANtY A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. [. . . ]