User manual AMERICAN AUDIO Q-SPAND INS

[. . . ] Q-SPAND Featuring: TM User Guide and Reference Manual AMERICAN AUDIO Rev 11/01 4295 Charter Street Los Angeles Ca. 90058 www. americandj. com Q-SPANDTM UNPACKING Every Q-SPANDTM has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment necessary to operate the mixer has arrived intact. [. . . ] To select a channels cue function depress the Cue Button (10) that is directly associated with the specific channel you wish to monitor. You may use the mixing function to blend both the Cue level and the Program level together. You can vary the output level to either hear more or less of either of the two levels. Sliding the Cue Mixing fader to the CUE position will allow you to hear more of the Cue level. Sliding the knob to the PGM position will allow you to hear more of the Program level (main output). You may also use the Cue Mixing Control to hear either the Cue level or the Program level exclusively. If the fader is in the full CUE position you will only hear the cue level, if the fader is in the full PGM position you will only hear the main output. This function will especially be useful for occasions when an external monitor is not available. CUE LEVEL VOLUME CONTROL - This knob is used to adjusts the headphone volume output level. Turn the knob in a clockwise direction to increase the headphone volume. TRUE BASS LEVEL - This knob is used to control the amount of "TRU BASS" process is applied to the output source signal. HEADPHONE JACK - This jack is used to connect your headphones to the mixer allowing you to monitor the cue source. Use headphones only rated at 8 ohms to 32 ohms. Most DJ headphones are rated at 16 ohm, these are highly recommended. Always be sure the Cue Level Volume (27) is set to minimum before you put the headphones on. SPLIT CUE - This button will activate the "Split Cue" function. When used with a set of stereo headphones, the Split Cue function will assign the Cue signal to the left channel of the headphones and the Program (main output) signal to the right channel of the headphones. Essentially splitting the cue signal in half. This process will allow for headphones mixing. Please note that this function will only work with a set of stereo headphones. WOW CONTROL - This button is used to activate the SRS® WOW Process. The WOWTM process is a combination of 3D Stereo Process and the TRU BASSTM Process. [. . . ] number by contacting our customer support team on out toll free number. 2-YEAR LIMITED WARRANTY A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 2 Year (730 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner's responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. [. . . ]