User manual AMERICAN AUDIO WR-80

[. . . ] WR-80 TM VHF Wireless Microphone USER INSTRUCTIONS professional products designed for the working dj. TM User Instructions Thank you for purchasing this American DJ® product. Please read the following instructions before installing or using your new unit. [. . . ] After turning the ON SWITCH on the microphone, the red BATTERY LOW LED will flash once indicating that the microphone is ON. After the microphone has been turned ON, the WR-80 receiver red LED TUNING light will come ON. The red LED indicates that a signal from the microphone has been received. Turn the volume knob for desired microphone volume. (2) (3) Precautions: (1) Load the battery properly in accordance with the diagram inside the microphone battery case. If the microphone is not in use, turn its power switch OFF. When system is not in use, disconnect from power. When battery on the wireless microphone is low, the red BATTERY LOW LED will come ON. Be sure to turn OFF microphone and receiver before changing the battery. WR-80 User Instructions page 2 (2) User Instructions Precautions (Cont). : (3) Each time you use the WR-80 microphone system use the following procedure: a. First, turn ON power to the WR-80 receiver. When shutting down system, first, turn OFF the wireless microphone. [. . . ] · Dimensions: 9. 75" H x 2" W / 250 mm x 55mm WR-80 Receiver · Sensitivity: 10uV · S/N Ratio @ 1mV input: 60dB · Output Power: 200 +/- 30mV · Total Harmonic Distortion: 1% · Power Supply: 12V 200mA · Output: 1/4" jack · Weight: . 5 lb. · Dimensions: 4. 25" L x 6. 25" W x 1. 5" H / 110mm x 155mm x 35mm (fig. 1) © American DJ® AUDIO 4295 Charter Street Los Angeles, CA 90058 USA www. americandj. com djs wanted. TM Specifications subject to change without notice. WR-80 User Instructions page 3 [. . . ]