User manual AMERICAN AUDIO XDM-352

[. . . ] User Instructions XDM-352 PREAMP MIXER Thank you for purchasing this American DJ® product. The XDM-352 is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. The XDM-352 has a 2 year limited warranty! C A U T I O N ! [. . . ] The signal is then controlled via the CHANNEL 3 FADER (4). · Connect your tape player, tuner, sound effects, CD player, cassette deck or any other line signals to the LINE jacks (27, 28, 29, & 30) on the rear panel. You can only control the line signals after switching the PHONO/LINE switches (3) to LINE. The signal is then controlled via the CH-1, CH-2, CH-3 and CH-4 faders (4). © American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice. XDM-352 User Instructions page 2 Functions 20 4 3 2 14 15 16 17 24 1 21 18 22 23 19 5 6 7 8 9 10 11 12 13 (1) POWER SWITCH (2) BASS/TREBLE CONTROL - Used to increase or decrease the LOWs and HIs of the input signal. (3) LINE/PHONO SWITCH - Used to select the input to be sent to the individual channel. Channel 1 and 2 can be switched phono/line. Channel 3 can either be switched line/line or phono/line. (4) CHANNEL FADER - Used to adjust the output level of the individual channel. (5) CUE SWITCH - Used to select the channel(s) to be monitored. (6) ASSIGN SWITCH - Used to switch the crossfader on or off. (7) CHANNEL ASSIGN SWITCH - Used to select which channel is to be mixed with another. (8) CROSSFADER - Mixes the signals of one channel with another. With the CHANNEL ASSIGN switches (7), you can choose which channel is to be mixed with another. EXAMPLE: Set the left CHANNEL ASSIGN switch to channel 1 and the right switch to channel 2 in order to mix the signal of channel I with channel 2. When the crossfader is set to the center position, both channels can be heard at once. (9) BEAT INDICATOR - The LED lights up at every bass beat of the respective source. As soon as the LEDs blink synchronously, the speed of the two sources is synchronized. (10) BOOTH LEVEL CONTROL - THE XDM-352 features a DJ BOOTH monitor system. Connect your monitor system to the BOOTH OUT jacks (33) on the rear panel. You can adjust the output level with the BOOTH LEVEL knob. (11) CUE MIXING CONTROL - Selects the channel for monitoring. [. . . ] Connect the ground lead of the turntable with this terminal. This helps to reduce humming and popping noises. (27), (28), (29), (30) LINE I PHONO INPUT JACKS - Input jack for CH-1, CH-2, CH-3 and CH-4. Connect turntables equipped with MM pickup cartridge to PHONO inputs. [. . . ]