Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AMX AXB-PT1015 CAMERA BALANCING GUIDE. We hope that this AMX AXB-PT1015 CAMERA BALANCING GUIDE user guide will be useful to you.
Lastmanuals help download the user guide AMX AXB-PT1015 CAMERA BALANCING GUIDE.
Manual abstract: user guide AMX AXB-PT1015 CAMERA BALANCING GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Camera Balancing Guide
AXB-PT10/15 PosiTrack Camera Controllers
IMPORTANT!READ THIS DOCUMENT BEFORE MOUNTING CAMERA Proper balance of the camera mount (with camera/lens/cradle) will result in optimal performance. Follow these balancing instructions prior to operation. [. . . ] Mount the camera as close to the Tilt Hub as possible to obtain a true center of gravity. Re-attach the camera mount (with camera/lens) to the cradle support bracket using the two 1/2" screws. Take the entire camera/mount and cradle assembly and align the lens with the Tilt Hub so that the vertical-axis intersects the center of the camera's iris, as shown in FIG. 4.
Camera points in this direction
0. 56" 39. 62 mm
Marker points Iris
Vertical tilt-axis
FIG. 1 Tilt Hub dimensions for the PT10/15 Caution: Do not lift the PT10/15 by the Camera/Lens cradle as this could damage internal components. To mount and balance the camera/lens: 1. Separate the camera mount and the cradle support bracket by removing the two 1/2" screws on the underside of the assembly (see FIG. Install the camera alignment peg to the mount at the position that best fits the camera/lens. Secure the camera/lens to the mount (at the camera alignment peg) with the 1/2" screw and 1/10" thick washer supplied (see FIG. Mounting holes (three sets) Cradle support bracket Camera\Lens cradle assembly (side view)
(underside
FIG. 4 Iris alignment with vertical tilt-axis 8. Mark the position of the cradle support bracket on the Tilt Hub (for later attachment). Remove the camera/lens and mount piece from the support bracket by unscrewing the two 1/2" screws on the underside of the camera mount.
2. Secure the support bracket to the Tilt Hub (at the same position marked for the iris alignment) on the PT10/15 with some or all of the four 1/2" screws and washers. [. . . ] The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 · 800. 222. 0913 · 469. 624. 7153 · fax 469. 624. 7153 · technical support 800. 932. 6993 · www. amx. com
93-0630
REV: B [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AMX AXB-PT1015 CAMERA BALANCING GUIDE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AMX AXB-PT1015 CAMERA BALANCING GUIDE will begin.
