User manual AMX DESIGN XPRESS-PROFESSIONAL V 1.1 ON SITE INSTALLER GUIDE

[. . . ] instruction manual Design XPress Professional version 1. 1 On-Site Installer's Guide Software Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software consists of generally available programming and development software, product documentation, sample applications, tools and utilities, and miscellaneous technical information. Please refer to the README. TXT file on the compact disc or download for further information regarding the components of the AMX Software. The AMX Software is subject to restrictions on distribution described in this License Agreement. [. . . ] An example is: NXT-CV17: 17" Modero Widescreen [1] Note: use NXD-CV17 for wall mount MAX-MMS: MAX MultiMedia Server [1] DXP-PRO v1. 1 - On-Site Installer's Guide 15 Understanding the Report File 16 DXP-PRO v1. 1 - On-Site Installer's Guide Using NetLinx Studio Using NetLinx Studio Upon completion of the Design XPress wizard the next step is to use NetLinx Studio to open the created project file. From this point on, this document assumes the installer has a good understanding of NetLinx Studio (it can be a difficult installation if the installer is a first time Design XPress user and a first time NetLinx Studio user). To open the workspace, use the Open Workspace option in the File menu and navigate to the folder where your project file resides. Once the workspace is open, expand all branches of the Navigator view to see the files that have been created in the project. There is also an option in DXP-PRO (upon completion of a project) that provides a popup dialog that gives you the option to automatically open the newly created workspace in NetLinx Studio. There is only one file under the Source Code branch: Main. axs. This is the main file and contains most of the system configuration information entered into the application/wizard. All other NetLinx software files are under the Include branch of the tree. There are a lot of include files because the software is broken up by function. For example, Lights_Tp. axi contains the software for controlling lights via the touch panels. All of the touch panel files are located under the User Interface branch. The text files and report file are located under the Other branch. To compile your project, open up the main source file and then select the Build Active System option under the Build menu (or click on the Build Active System icon from the toolbar below the Main menu). Any time changes are made the software has to be compiled. Remember that the page flips for the touch panel are code-driven by the Master containing the downloaded project file information. If the target Master (ex:192. 192. 192. 192) does not contain the compiled project files from NetLinx Studio and/or is not configured as the target Master within the G4 panel's System Connection firmware page; page flips will not work. The action of pressing a location on the panel sends this request to the target Master, which then replies back to the panel with the corresponding action to take. Without the proper codes loaded on the target Master, the panel page or button doesn't have the any destination action information. Before beginning: 1. Setup and install your NetLinx Master (NI Controller or NXC-ME260/64). Verify you have installed the latest version of NetLinx Studio on your PC. If an update is necessary, download the latest Studio software from www. amx. com > Tech Center > Downloadable Files > Application Files > NetLinx Studio 2. 2. This program is used to setup a System number, obtain/assign the IP/URL for the connected NetLinx Master, and transfer firmware KIT files to the Master. Verify a proper connection of an Ethernet cable from the Controller to an Ethernet Hub. [. . . ] The DXP-PRO v1. 1 - On-Site Installer's Guide 25 Using NetLinx Studio communication method is then highlighted in green on the bottom of the NetLinx Studio window. If the connection fails to establish, a Connection Failed dialog appears. Try selecting a different IP Address if communication fails. Press the Retry button to reconnect using the same communication parameters. Press the Change button to alter your communication parameters and repeat steps 2 thru 10. 15. [. . . ]