User manual AMX KEYPADBUILDER

[. . . ] Operation/Reference Guide KeypadBuilder v2. 1 Keypad Device Design Software S of t w ar e Document ID: 33-004-2942 Initial Release: / Last Revised: 06/7/2006 AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] This will open a new keypad device project into the KeypadBuilder Project Navigation Pane. Open Project Close Project Open Exported DXF File Launches the Open Project dialog window. Opens a saved . KPB file into the KeypadBuilder Project Navigation Pane Closes the project currently open. An option to save will occur if the file has not recently been saved. Launches the Viewing Exported DXF window, this window is a representation of the DXF created by KeypadBuilder. It is useful to ensure your engraving file is exactly as you had envisioned it. If the project has not been previously saved it will launch the Save As dialog window. This feature allows you to make new revision files. Closes the KeypadBuilder application. Save Save As The Most Recently Updated List A list of most recently opened KeypadBuilder files. Exit KeypadBuilder v2. 1 51 The Mio Attaché KeypadBuilder Work Area View Menu Contains options for configuring the KeypadBuilder work area. View Menu Toolbar Tasks Pane Visual Styles Toggles the toolbar in and out of view. Toggles the tasks pane in and out of view. Mouse-over to open the visual style sub-menu. The visual style is the look and feel of the KeypadBuilder application. The styles emulate Windows themes: · Default · Office XP ® · Office 2003 ® · Windows XP ® Theme Navigation Menu Only available when a . KPB file is open, this menu is the crux of adding functionality to the keypad device. While viewing a graphic representation of your selected keypad device, you can do the following: Navigation Menu Project Configuration. . . Opens the Project Configuration dialog window. This is topical Project Information, Device Selection and Device Setup Information. Opens the Button Configuration dialog window. Click to select buttons, and then assign button properties, Configuration Options and Display Options. The Channel Map can be accessed from this dialog. Click to select buttons and create either text or icon engraving instructions. The engraving dialog develops a . DXF file that must be provided to AMX to create your custom engraved buttons. [. . . ] Click the radio button next to the desired selection to select. 112 KeypadBuilder v2. 1 Mio Modero DMS Application Operations Edit List-table Dialog Window The Edit List Table dialog window is accessible when a list box button is selected in the Page Navigation Window, then Project > List box Items. This dialog window creates and edits items contained within the list box table. Table - The name of the table established in the Associate Data Table Dialog Window. Type within this field to edit the table name. [. . . ]