User manual AMX MAX-AVP AUDIO VIDEO PLAYER

[. . . ] Operation/Reference Guide MAX-AVP Audio-Video Player Document ID: 065-004-2964 Last Revised: 9/06/2006 AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] The current Random Play setting is indicated by an icon in the upper-right corner of the screen (FIG. 3 Random Play and Normal Play icons Press RANDOM one time to initiate randomized playback, as indicated by the icon. Press RANDOM again to return to normal (sorted) playback. CD Playback Display Screen Press the DISPLAY button while playing a CD to toggle the CD Playback Screen (FIG. 4 CD Playback Screen The elements on this page include: Track Listing: Indicates the track that is currently playing. Highlight and select this item to enter a track number for playback (via the number buttons on the remote controller). Artist: Indicates the Artist name associated with this CD. Shuffle: Indicates the current playback setting (Random or Sorted). Local CD Album: Indicates that the currently playing CD is Local. Repeat setting: Indicates the current repeat playback setting (On or Off). Playback Status Bars: Top bar indicates playback of the entire CD, the lower bar indicates playback of the current track. The total playback time for this disc is displayed to the right of the Status Bar. MAX-AVP Audio-Video Player 23 MAX-AVP User Interface Playback of a Local DVD For DVD playback, the AVP's on-screen display shows the DVD disc menu. Use the transport controls on the remote controller to Play, Stop and Pause playback; and use the Arrow buttons to navigate through the options on the DVD Menu. Note that you can initiate playback either via the options on the DVD Menu or by pressing PLAY on the remote controller. When you stop playback, the AVP saves your place in the movie, so that when you press Play again, it starts playing at the point that it was stopped. To clear the placeholder, so that the movie will resume play from the beginning, press STOP again. Several options on the remote controller are specific to accessing and playing DVDs stored on a MAX Server, and do not apply to local DVD playback, including: MAX, RETURN, MARKER, MARKER SEARCH and INFO. Pause/Step Press PAUSE one time to pause playback, press PLAY to resume. With playback paused, press PAUSE again to manually step frame-by-frame through the movie (press PLAY to resume normal playback). Accessing the DVD Menu At any time during playback, press the MENU button to stop playback and access the DVD's menu screen. Note that if you go to the DVD Menu screen during playback, the AVP saves a placeholder, so that when you resume playback, it automatically starts playing the movie at the point that it was stopped. If you press STOP, the placeholder is removed. Once the placeholder has been removed, the next time the movie is started it will start at the beginning. Skipping Chapters Press the SKIP/SCROLL (+ / -) buttons to skip forward and back through the chapters on the DVD. The SKIP/SCROLL (+ / -) buttons also allow you to page through large lists (such as on the Browse or Playlist pages), as opposed to scrolling through each item in the list. Scanning Within Chapters Press the Scan (+ / -) buttons to scan forward and back (cue/rewind) through the current chapter. When scanning a chapter, the on-screen display indicates the total time of the disc and the current playback position for the current chapter. Press the Scan (+ / -) button one time to scan at 2X speed, press again to increase the scan speed (2X, 4X, 8X or 16X). Press Play to resume playback at the current position (indicated in the Status Bar). Slow Motion Playback: Press the SLOW button during playback to play the movie in slow-motion (1/2X speed), press again to decrease the playback speed (1/2X, 1/4X or 1/8X). [. . . ] Apply & Save Settings as Default: Apply the current settings and save them as the default. If video settings were changed, they will be tested for 10 seconds. Confirm to save, cancel or wait for timeout to revert to previous settings. On exiting the Setup page, the system will prompt you to save any changes, if any settings have been changed. 48 MAX-AVP Audio-Video Player MAX-AVP User Interface Setup Page ­ Tuning tab Use the options in the Tuning tab (FIG. 35) to set the volume level for stereo analog outputs (Volume), and fine-tune video output (Brightness, Contrast Saturation). FIG. [. . . ]