User manual AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W. We hope that this AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W user guide will be useful to you.
Lastmanuals help download the user guide AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W.
Manual abstract: user guide AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Sheet
RDM-INC Incandescent Dimmer Module 2400 W
The RDM-INC Incandescent Dimming Module is designed for use with the RDA series of enclosures, in a AMX LightingTM modular digital dimming system. It is a standard 2400 W incandescent dimmer. [. . . ] All electrical ratings are for continuous duty. This module may require extra power from the AXlink connection or an external power supply connected to the control card.
Connecting the RDM-INC to the AMX Lighting Master
Pin 4 (GND) Pin 3 (RLY) Pin 2 (DIM) Pin 1 (+12 V) RDM-INC four-pin module connector 350µS Choke 2 (-) 1 (+) 4-pin plug from a RDM series module Note: The 4-pin plugs from the module connector to the 4-pin connector on the master (black plug cover facing up).
FIG. 2 Connecting the RDM-INC to the AMX Lighting Master 20 A power device
Lighting Application Drawing
All neutrals are common to the Neutral block in the enclosure. Provide a separate neutral for each load. Load
Low-voltage control wiring: 4-pin connector to AMX Lighting master controller
Line in (HOT)
FIG. 1 RDM-INC
RDM-INC UL and C-UL Ratings:
· · · · · · · · · · · · · · · · 120 VAC, 50/60 Hz, 2400 W 240/277 VAC, 50/60 Hz, 2400 W Incandescent Low-voltage Neon, cold-cathode Two-wire, phase-controlled ballast
FIG. 3 Sample wiring diagram Circuit breaker panel
Neutral Load Neon lights (cold-cathode, on/off)
Suggested Dimmed Loads:
Neutral Load Two-wire dimmable ballast
Specifications:
Dimensions (HW): 10. 0" x 2. 75" (25. 4 cm x 6. 985 cm) Phase dependant Use wires rated at 75°C (167°F) Torque terminals to 7 in-lbs. wire size: 10 AWG (4 mm²) Wire stripping length: 0. 28" (7 mm) Weight: 3. 7 lbs. (1. 67 kg) BTU/hr: 300 Control current: 45 mA @ 12 VDC Choke: 350 µS Rise time @ 120 VAC 175 µS Rise time @ 240 VAC All Class 1 wiring must be connected to proper terminals. All control wiring must be connected to proper terminals. [. . . ] AMX Corporation reserves the right to alter specifications without notice at any time. 3000 research drive, richardson, TX 75082 USA · 469. 624. 8000 · 800. 222. 0193 · fax 469. 624. 7153 · technical support 800. 932. 6993 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AMX RDM-INC INCANDESCENT DIMMER MODULE, 2,400 W will begin.
