User manual AMX VIEWPOINT WIRELESS TOUCH PANELS (G3 FIRMWARE)

[. . . ] instruction manual ViewPoint Wireless Touch Panels (Extended Range) (Firmware version G3) Touc h Pa n els an d A cc e ss o r ie s AMX Limited Warranty and Disclaimer AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX Corporation does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] Example: SEND_COMMAND TP, "'@CFF', 1, 72" Sets the OFF feedback fill color to White for variable text button 1. @CFN This only works if the specified background color is not the same as the current color. Sets the ON feed- Syntax: back fill color to "'@CFN', <variable text address>, <color_number>" the specified Variables: color. variable text address = 1 - 255 color number = See the Colors and Programming Numbers table on page 23. Example: SEND_COMMAND TP, "'@CFN', 1, 30" Sets the ON feedback fill color to Aqua for variable text button 1. 24 ViewPoint Wireless Touch Panels Programming Shorthand Send_Commands (Cont. ) @CPG This only works if the new background color is not the same as the current color. Sets the page with Syntax: specified page "'@CPG', <color_number>, '<page name>'" name backVariables: ground color to color number = See the Colors and Programming Numbers table on page 23. page name = 1 ­ 50 ASCII characters Example: SEND_COMMAND TP, "'@CPG', 87, 'Main Page'" Sets the page title to Main Page, and the color to Black. @CPP Sets the specified page's background color to the specified color. This only works if the specified background color is not the same as the current color. Syntax: "'@CPP', <color_number>, '<pop-up page name>'" Variables: color number = See the Colors and Programming Numbers table on page 23. pop-up page name = 1 ­ 50 ASCII characters Example: SEND_COMMAND TP, "'@CPP', 54, 'Audio Page'" Sets the popup page title to Audio Page, and the color to Purple. @CTF Sets the OFF feedback text color to the specified color. This only works if the specified background color is not the same as the current color. Syntax: "'@CTF', <variable text address>, <color_number>" Variables: variable text address = 1 ­ 255 color number = See the Colors and Programming Numbers table on page 23. Example: SEND_COMMAND TP, "'@CTF', 1, 87" Sets the OFF feedback text color to Black for variable text button 1. @CTN This only works if the specified background color is not the same as the current color. Sets the ON feed- Syntax: back text color to "'@CTN', <variable text address>, <color_number>" the specified Variables: color. variable text address = 1 ­ 255 color number = See the Colors and Programming Numbers table on page 23. Example: SEND_COMMAND TP, "'@CTN', 1, 72" Sets the ON feedback text color to White for variable text button 1. @IDF The touch panel returns its MS-DOS file name in a string. @IDP Queries the touch panel to return a string with the TPDesign3 project name. Syntax: "'@IDF'" Example: SEND_COMMAND TP, "'@IDF'" The touch panel returns its MS-DOS file name in a string. [. . . ] A ViewPoint battery can be charged in three different ways: An external power supply can be plugged into the side of the ViewPoint which will supply external power to run the panel and the onboard battery charger. The ViewPoint can be placed onto a VPA-DS ViewPort Docking Station that will supply external power to run the panel and the onboard battery charger. The ViewPoint battery can be removed from the ViewPoint and placed into the battery compartment of the ViewPort Docking Station (VPA-DS). Charging of the battery within the compartment and the battery within the ViewPoint are no longer mutually exclusive. Insert or remove a battery slowly to avoid false indications on the LEDs. A charge session for a ViewPoint (with VPA-BP battery) on the ViewPort lasts for 5 hours of continuous use. [. . . ]