Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ANTEC NEOPOWER 480. We hope that this ANTEC NEOPOWER 480 user guide will be useful to you.
Lastmanuals help download the user guide ANTEC NEOPOWER 480.
Detailed instructions for use are in the User's Guide.
[. . . ] NeoPower can also control the speed of your system case fans. You'll find two dedicated fan connectors (marked "Fan Only") to which you can connect your system case fans. NeoPower's circuitry will then regulate your case fans, further reducing system noise. Note: Please don't connect more than three external fans to the "Fan Only" connectors. [. . . ] Remove the existing power supply from your computer case and replace it with the NeoPower power supply. Connect the 24-pin Main Power Connector and the 4-pin +12V Connector to your motherboard as needed. You will need to use the 24-pin to 20-pin adapter if your motherboard uses a 20-pin connection. In the package, you'll find a set of power supply-toMolex connectors. (One of the PSU to Molex connectors is shorter than the others. ) Connect Photo 2 one of the 6-pin connectors to any of the 6-pin sockets on the power supply. Connect the Molex connector to your hard disk drives or CD-ROM. If you have a SATA drive: In the package, you'll find a power supply-toSATA connector. Connect the 6-pin connector to any of the 6-pin sockets on the power supply. Connect the SATA connector to your SATA drive. In the package, you'll find a power supply-to-Fan Only connector. Connect the 2-pin connector to the 2-pin socket on the power supply. Connect the Fan-Only connector to your system fans. This will allow NeoPower to control the speed of the fans you've connected. Note: Do not connect the Fan-Only connectors to CPU fans. In the package, you'll find a Molex-to-Floppy adapter. Connect it to a Molex connector, and connect a floppy drive if you wish. In the package, you'll find a PCI Express graphic card connector. It is identifiable as the only 6-pin connector with 3 yellow wires and 3 black wires. Connect the 6-pin PCI Express connector to your PCI Express graphic card if needed. Note: Please consult the user manual supplied with your PCI Express graphic card for detailed usage instructions. Optional: If you'd like to monitor the speed of the power supply fan, connect the 3-pin fan signal connector to one of the fan connectors on your motherboard. Note: You don't need to connect the fan signal connector in order for the power supply to work. [. . . ] 3. 0 PROTECTION: If the power supply is latched into shutdown stage due to protection circuit activity, the power supply shall return to normal operation only after the fault
5 6
POWER FACTOR VALUE 0. 90 (min. ) INRUSH CURRENT 115V(max) 230V(max) 80A 100A 40A 60A
NEO380 NEO480
at 25°C cold start
has been removed and reset PS-ON for a minimum of 1 second. 3. 1 OVER CURRENT PROTECTION +5V NEO380 NEO480 40A Min. Over current (Sense level) +12V1 &+12V2
115V/230V(FULL LOAD):1mS minimum
AC-V
+3. 3V
AC-O N
52A Max. 47A Max.
AC-O FF
3. 2 OVER VOLTAGE PROTECTION Sense level +12V1&+12V2 +5V +3. 3V Over Voltage 13. 3V Min. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ANTEC NEOPOWER 480
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ANTEC NEOPOWER 480 will begin.
