User manual APEX AD-1130W

[. . . ] Safety Precautions The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOTOPEN ! AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. ONLYQUALIFIED SERVICE PERSONNELSHOULD ATTEMPT THIS. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY INSERT. This Digital Video Disc Player employs a Laser System. [. . . ] Press ENTER/PLAY. After closing the disc tray playback will start. As the DVD video player is reading the disc, a menu will appear on screen or you may access the menu by pressing the TITLE button. 4. Select a title/chapter or track. Press and during playback to move between tracks. You also can press or the number buttons to select the title/chapter or track. 5. Stop playback Press the STOP button once, the player is stopped, and you can press the RESUME button to replay from the point stopped (except MP3, audio CD). Press the STOP button twice, the player is stoppe, then press the ENTER/PLAY to playback from the start. ! · Moving the DVD video player during playback may cause damage to the disc as well as the player. · To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote control or DVD video player. · If the picture on TV screen will keep going up and down, check the TV TYPE in the setup menu, and set to the correct type, PAL or NTSC or just MULTI. 7 Playback Features 1. Fast forward playback Press during normal playback. Each press wil increase the speed by the following factor: 2X, 4X, 8X or 16X (with no audio). Press ENTER/ to resume normal playback. 2x 2. Fast reverse playback Press during normal playback. Each press wil increase the speed by the following factor: 2X, 4X, 8X or 16X (with no audio). Press ENTER/ to resume normal playback. 3. Pause playback Press PAUSE during normal playback to pause playback. Press ENTER/ to resume normal playback. 4. Frame advance Press STEP during pause playback. One frame is advanced each time you press STEP. Press ENTER/ to resume normal playback. 1/2 5. Slow motion Press SLOW during normal playback. Each press will slow the playback speed to 1/2, 1/4, 1/8 or 1/16 of the normal speed (with no audio). Press ENTER/ to resume normal playback. 6. [. . . ] · Connect the video cable into the jacks securely. · Select the correct input mode of the audio receiver so you can listen to the sound from the DVD video player. · Connect the audio cable into the jacks securely. · The video cable is not connected securely No sound · The equipment connected with the audio cable is not set to receive DVD signal output. · The audio cables are not connected securely. [. . . ]