User manual APPLIED ENERGY XPLUS 275

[. . . ] Guarantee Customers outside UK - see international below. UK: The fan is guaranteed against defects for 3 years from date of purchase. If you have any problems, contact Xpelair's Head Office at address shown below. [. . . ] Our engineers are there to help during normal office hours (UK only) and may be faxed at all other times on +44 (0) 8709 000530. Customers outside the UK please contact your local Xpelair distributor, details of which are available from the UK office. Description Xplus 275 As far as possible from and opposite to the main source of air replacement to ensure airflow across the room (eg, opposite an internal doorway). Not where ambient temperatures are likely to exceed 50oC. or above a cooker hob or eye level grill. If installing in a room containing a fuel burning device, it is the installer's responsibility to ensure that there is enough replacement air to prevent fumes being drawn down the flue when the fan is operating up to maximum extract. Refer to Building Regulations for specific requirements. Exhaust air must not be discharged into a flue used for exhausting fumes from appliances supplied with energy other than electric. Requirements of all authorities concerned must be observed for exhaust air discharge. When installed for use in possible chemical corrosive atmospheres, consult our Technical Service Department. (For overseas markets contact your local Xpelair Distributor). The inlet grilles should be situated at least 0. 5m distance from the discharge outlet of a flued heating or cooking appliance. Position of the fan 1. Detach the appropriate inlet covers after removing the fixing screws. Note: do not detach cover from any inlet not being used. Install the ducting to connect the fan to the air intakes and to the outlet. [. . . ] For flexible ducting, you will need worm drive clips (available from Xpelair) to attach the ducting to the fan inlets and outlet. If installing in a position where condensation is likely to run back towards the fan, you will need a suitable condensation trap. At least 0. 5m away from open door or window, or the inlet of another ventilation device. 1. Before cleaning isolate completely from the mains supply. [. . . ]