User manual ARCAM CR100

[. . . ] Ha n d b o o k CR100 CR100 remote control English Arcam CR100: one remote for many devices Contents arcam CR100: one remote for many devices . . . . . . E-2 Useful information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4 Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] TV/AV) Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier (not used) Navigate setup and programme selection menus. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Activates PIP channel down, if available Duplicates function of REd key for Text TV Duplicates function of GREEn key for Text TV Duplicates function of YELLoW key for Text TV Duplicates function of bLUE key for Text TV EXIT function on some models. Functions as original remote key, if available. Toggles the mute function, if available. By default this key always operates the AMP Mute Channel down Channel up Decrease (­) and increase (+) amplifier volume Toggles TEXT page on/off TEXT page off Turns Programme-InProgramme (PIP) on, if available Activates PIP move, if available CR100 E-10 TUn mode Toggles power between stand-by and on. Selects FM band on the DAB tuner English Stops playback (DAB rewind radio) Start recording (DAB rewind radio) to Functions as original remote number key. Selects Tape input on amplifier Selects FM band Selects DAB band on the DAB tuner Toggles FM tuner mode between FM Mute mode and Mono mode on Arcam Receivers and Tuners. Toggles between Preset and Tune mode on Arcam Receivers and Tuners. Stores tuner preset on Arcam Receivers and Tuners. Cycles through RDS radio display modes for Arcam Receiver and Tuners. Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier Selects AM band Navigate setup and programme selection menus. ok confirms a selection. SHIFT SHIFT B to Power on C to Power off Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Cycles through different frequency bands. Functions as original remote key, if available Cycles through the front panel display's brightness options (dim to bright, off) Toggles the mute function, if available. By default this key always operates the AMP Mute. Sends Preset Down command Sends Preset Up command Decrease (­) and increase (+) amplifier volume Fast rewind (DAB rewind radio) Play (DAB rewind radio) Toggles pause of playback (DAB rewind radio) Fast forward (DAB rewind radio) CR100 E-11 aMP mode Toggles power between stand-by and on. 1 to 2 3 4 5 6 7 8 Sends Preset Down command Sends Preset Up command Decrease (­) and increase (+) amplifier volume Toggles Direct mode Toggles EQ on/off on Arcam surround amplifiers with room EQ function Cycles through available THX modes on Arcam surround amplifiers with THX function Cycles through stereo effects on Arcam surround amplifiers Restores current Favourite Preset on Arcam surround amplifiers, if available Displays lip sync adjustment menu on Arcam surround amplifiers Displays subwoofer adjustment menu on Arcam surround amplifiers DVD input CD player input AV (television sound input) AUX Auxiliary line input VCR Video Cassette Recorder input SAT Satellite decoder input TUN DAB/FM/AM tuner input Phono input, if available Selects Tape input on amplifier Selects FM band on Tuner Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier Selects AM band Navigate the menus on Arcam surround amplifiers ok confirms a selection. Displays trim levels menu on Arcam surround amplifiers Toggles between FM/ Mono-Stereo/Mute on AVR Toggles between Tune and Preset mode on AVR Stores tuner preset on AVR Cycles through RDS Info options on AVR B to Power on SHIFT C to Power off SHIFT E to switch Zone 2 SHIFT on, if available. SHIFT D to switch Zone 2 off, if available. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Changes Audio mode Activates the main menu on Arcam amplifier Cycles through Display panel brightness options (dim to bright, off) Toggles the mute function, if available. By default this key always operates the AMP Mute CR100 E-12 aUX mode Toggles power between stand-by and on. By default, AUX mode has been set up for future ARCAM products. English The AUX control page can be assigned for use with a DVD or VCR player using the following method: 1. Unlock the code page (this is described on page 18 ­ `Locking/ Unlocking a specific device mode'). The functions of AUX mode can now be replaced by those of a DVD or VCR by changing the four-figure device code (this is also explained on page 18 ­ `Mode Mover'). Now lock the mode so the new settings are not changed inadvertently. to Functions as original remote number key. Selects Tape input on amplifier (not used) Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier (not used) Navigate setup and programme selection menus. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Behaviour of all other CR100 keys in AUX mode depends on the type of auxiliary device. Refer to the appropriate table for the device. CR100 E-13 VCR mode Toggles power between stand-by and on. Ejects tape Stop playback Starts recording to Functions as original remote number key. Selects Tape input on amplifier Toggles between available inputs (e. g. [. . . ] Example: To set the Mode key IR punch-through to aMP 1. Press Resetting the CR100 Resetting the CR100 will erase all learned functions across all modes, as well as some other programmed functions like Macros. It will not reset the Device Mode keys; these will remain programmed to your choice of component. . LED blinks twice: blinks twice: . [. . . ]