User manual ARCAM FMJ CD17

[. . . ] CD17 Handbook Compact Disc player english class ii product This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth (`ground' in the U. S. ). safety guidelines CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] E-9 Amplifer panel ­ IR commands . . . . . . . . . . . . . . . . . . . . . . . E-9 remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e-8 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e-10 Radio interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-10 Laser radiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-10 product guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e-11 5 1 2. 39 e-3 english Arcam's CD17 provides class-leading sound quality from compact discs. The CD17 has a Delta-Sigma DAC (Digital-to-Analogue Converter) with 24-bit filtering, allowing fine details to be reproduced in startling clarity. The CR10 remote control supplied with the CD17 is simple to use and can also control an Arcam amplifier. The high performance CD17 audio disc player is designed to truly bring your music to life. installation Placing the unit < < < Place the CD17 on a level, firm surface, avoiding direct sunlight and sources of heat or damp. Do not place the CD17 on top of an amplifier or other source of heat. Do not place the CD17 in an enclosed space such as a bookcase or closed cabinet unless there is good provision for ventilation. The CD17 is designed to run warm during normal operation. Do not place any other component or item on top of the CD17 as this may obstruct airflow around the unit, causing the CD17 to run hot. Make sure the remote-control receiver to the left of the front panel display is unobstructed, otherwise this will impair the use of the remotecontrol. Do not place your record deck on top of this unit. Record decks are very sensitive to the noise generated by mains power supplies which will be heard as a background `hum' if the record deck is too close. Power The CD17 is supplied with a moulded mains plug already fitted to the lead. Check that the plug supplied fits your supply ­ should you require a new mains lead, please contact your Arcam dealer. If your mains supply voltage or mains plug is different, please contact your Arcam dealer immediately Push the IEC plug end of the power cable into the socket on the back of the CD17, making sure that it is pushed in firmly. Plug the other end of the cable into your mains socket and, if necessary, switch the socket on. interconnect cables We recommend the use of high-quality screened cables that are designed for the particular application. Other cables will have different impedance characteristics that will degrade the performance of your system (for example, do not use cabling intended for video use to carry audio signals). All cables should be kept as short as is practically possible. It is good practice when connecting your equipment to make sure that the mains power-supply cabling is kept as far away as possible from your audio cables. Failure to do so may result in unwanted noise in the audio signals. < < < e-4 Power inlet Connect the correct mains cable here. Voltage select Ensure the voltage selected matches the local power supply. optical digital output Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable. analogue audio outputs Connect these to your amplifier's CD or other line-level input using suitable high quality interconnect cables. [. . . ] For tracks greater than 9, enter the digits in sequence. For example, to play track 15, press and hold 1 until the number on the display moves to the left, then press 5. Open/close disc tray Toggles the mute function, if available. By default this key always operates the AMP Mute Play Pause playback Stop playback Decrease (VoL­) or increase (VoL+) amplifier volume Fast search backwards Fast search forwards Press and release to skip back to the beginning of the current/previous track. [. . . ]