User manual ARIENS 824006

[. . . ] Select Proper ties to view details about each device. Find the device that matches the MAC address of your NMT and select the "Allow" menu item. If your NMT does not already come with a pre-installed HDD, you can install your own HDD and enable full NMT functionality by following the steps below: 1) Turn OFF the NMT. 2) Attach a HDD directly to the NMT SATA connector and connect the molex power supply 3) Power on the NMT and goto the Setup -> Maintenance page and select the "NMT setup wizard" option. 4) Step through the NMT wizard to par tition, format and install NMT applications on the HDD. [. . . ] Please make sure you have a internet connection available and that the NMT is connected to it. Interface When the NMT first star ts, the following navigation options are available: * Media Source This page is used to select which source you want to stream content from. NMT Applications* - Configure the NMT media ser vers run state, SMB workgroup, device name and also the unified password which applies to both SMB and FTP access. Torrent settings allows the configuration of the BitTorrent client. Share music, pictures, and video on your network. Sharing settings Share my media to: Set tings. . . DVD / Audio CD** Maintenance - Configure DVD and AudioCD playback settings. - Displays the current device firmware version and options for firmware update and NMT morphing*** Unknown Device Unknown Device Setup -> Network page. It will be listed under the "Ethernet Configuration" heading. 5) After reboot, most of the NMT applications will star t up automatically. To manually Note: This step will DELETE ALL the data on your HDD ! Allow Deny Deny for all users Remove from list Properties How does sharing change firewall settings?OK Cancel Apply * ** *** Only available with HDD and NMT apps installed Only if a DVD - ROM is attached (by USB or SATA) Refer to Page 3 for more details Allow Deny adjust the settings for the NMT applications, go to the Setup page. Figure 4. 0 : Media Sharing screen * Syabas CE- HTML Ser ver Figure 1. 0 : Media Source screen Home . Audio / Video . Firmware Version Kernel Version : : : : 01-17-080529-15-400-000 15-SYB Networked Media Tank (NMT) Functions Note: The NMT's IP address can be found from the NMT's Setup -> Network page. Syabas provides a proprietar y ser ver for use with the NMT. Simply install the ser ver available for download at the following link: http://www. networkedmediatank. com/download/myihome. html Once installed, the ser ver should be automatically detected by the NMT and added to the Media Source page list. . Device Name Samba Workgroup : : : SMP8634- Figure 6. 0 : Map Network Drive screen save stop stop stop stop stop stop stop Map Network Drive Windows can help you connect to a shared network folder and assign a drive letter to the connection so that you can access the folder using My Computer. Specify the drive letter for the connection and the folder that you want to connect to: change password WORKGROUP UPnP AV Server myiHome Server FTP Server Samba Server NFS Server Torrent Usenet Client : running : running : running : running : running : running : running c) Select the drive you want your NMT shared folders to be represented. Free space: 423. 1GB Used: 8% Refresh Scheduler Setting stop Inactive delete Movie 1 (816. 74M) DL: 0. 20M (1. 2%) Rx: Tx: Movie 2 (513. 2M) DL: 0. 35M (6. 5%) Rx: 1. 72kB/s Tx: 0. 00kB/s Movie 3(233. 8M) DL: 0. 13M (0. 0%) Rx: 1. 43KB/s Tx: 0. 00KB/s Peer(s) : 3 Ratio : 0. 00 Peer(s) : 2 Ratio : 0. 00 Peer(s) : 0 Ratio : 0. 00 start ser ver1. password=PASSWORD #Maximum number of simultaneous connections to this ser ver Downloading / setup / ser ver1. connections=4 - Once completed, save the file to the same place and restar t the Usenet ser vice in the NMT Applications menu (Setup > NMT Applications). Drive: Folder: Z: \\AHLOK\share Browse. . Downloading Figure 5. 0 : NMT Applications Setup screen Example:\\server\share Reconnect a logon Connect using a different user name . Sign up for online storage or connect to a network server. 1 - 3 / 3 items < Back Finish Cancel * FTP Ser ver Allows easy remote access and management of the NMT's HDD. The ser ver is always running by default after installing the NMT applications. Usage Instructions: - The FTP ser ver runs on the default por t (21). So just point your FTP client to <NMT IP Address> Username: nmt Password: 1234 (default) * NAS (NFS Ser ver) Note: FTP username is not configurable, but the password can be configured and is shared with the SMB ser ver. Figure 8. 0 : Torrent downloader page screen Figure 7. 0 : Map Network Drive dialog screen * Usenet: Working with NZBGet Working with NZBGet is simple and quick. Connect to the NZBGet web GUI from a browser via http://ip. of. your. nmt:8066. Note: If the IP address of your NMT is `192. 168. 1. 100', type http://192. 168. 1. 100:8066 in the address bar of your web browser. d) The mapped drive should appear in "My Computer ". - SMB defaults: Username: nmt Password : 1234 Note: You can configure the Hostname from the Setup -> Preferences -> Hostname option on the NMT. - You can upload torrent files and control the torrent download settings from this page. - Torrent files are star ted automatically whenever the NMT browser encounters a . torrent file. [. . . ] You can also load . torrent file from USB storage devices. - You can also configure some client settings from the Setup -> Torrent page on the NMT. To log in, use the following access username and password: User ID Password : nmt : 1234 This ser ver allows a remote PC to access the locally installed HDD on the NMT as a NFS share. Usage Instructions: The path to the NFS ser ver on NMT is <NMT IP ADDRESS>:/share * Setting up the NZBGet on the NMT In the root of your hard disk you will find a folder called . nzbget. Inside this folder you will find two files: nzbget. conf and unpak. sh. * Shutting down, Reboot and Powering down the unit The Power key will only turns of f the display for the unit. [. . . ]