User manual ARIENS 924048

[. . . ] To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. Instruct persons using the equipment (in particular children) on possible sources of danger during exercising. The unit requires a power supply of 220-230 V/50 Hz. It should be connected only to a safety socket with a single 10-A fuse. [. . . ] When the unit is not in use, unplug it from the power supply. Ensure that the power cable is not pinched and that no-one can trip over it. all electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health!Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by ARIENS service staff or qualified personnel trained by ARIENS. Always observe the general safety rules and precautions for working with electrical equipment. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. [. . . ] Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. To pull off the pedal arms remove cap and screw (A). Grip the pedal arm tightly, and screw in an M12 bolt (not supplied) into the thread (B). After a few turns you may take off the pedal arm (C). [. . . ]