User manual ART MX622

[. . . ] Three stereo line level inputs are also provided via RCA type jacks with separate Level controls for each stereo pair. Stereo Record output RCA jacks provide full-level signal of the entire mix at all times. Main outputs are stereo balanced ¼" TRS with Master Level and full range Bass/Treble equalization. [. . . ] h) Connect either the ¼" balanced Left and Right Main Output jacks or the RCA Record Out jacks to the input of the mixer, tape deck, computer, or power amplifier with the appropriate balanced or unbalanced, shielded cables. i) Switch on the power and set the Master Level to the ½ way setting, then adjust the input channel Level controls as required for the best mix and level while checking the Mic/Line channel CLIP LEDs for activity. Turn down any channel with CLIP activity until the LED is on during extreme peaks only. j) Adjust BASS and TREBLE controls for the desired balance. The mid position has flat frequency response. k) Re-adjust the Master Level as required for best signal level. WARNINGS All operating instructions should be read before using this equipment. To prevent the risk of electrical shock, do not remove the cover or the back. There are no user-serviceable parts inside. Please refer servicing to a qualified service technician. Do not expose this unit to rain or moisture or to heat sources such as radiators, stoves, or other items that generate excessive heat. This unit should be cleaned only with a damp cloth. When moving this equipment, it should be placed in its original carton and packing, to reduce the risk of damage in transit. WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (ART) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of three years from the date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed. ART reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured. [. . . ] You may contact Customer Service for more assistance, or directly request a Return Authorization for service in the "resources" area of the website. 3) If you are returning the unit for service, pack the unit in its original carton or a reasonable substitute. The original packaging may not be suitable as a shipping carton, so consider putting the packaged unit in another box for shipping. [. . . ]