User manual ARTHUR MARTIN ASF66830W

[. . . ] user manual Dishwasher ASF66830 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Set the water softener Use of dishwasher salt Use of rinse aid Daily use Load cutlery and dishes Use of detergent Multi-tab function Select and start a washing programme 2 4 5 6 6 7 8 9 10 13 14 15 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 16 17 18 19 20 21 21 22 23 24 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] Activation/deactivation of the rinse aid dispenser 1. Press and hold, at the same time, the function buttons B and C. The programme indicator lights above function buttons A, B and C start flashing 3. Press function button B, the programme indicator lights above function buttons A and C go off. The programme indicator light above function button B continues to flash. The digital display shows the current setting. Rinse aid dispenser deactivated Rinse aid dispenser activated 4. To change the setting, press button B again. The digital display shows the new setting. To memorize the operation, switch off the appliance. If you decide to revert back to the use of individual detergents we advise that you: 1. Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Select a washing programme (see 'Washing programmes' chart). When a programme has been selected the corresponding light comes on. Close the dishwasher door, the programme starts automatically. 16 electrolux Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours. [. . . ] If you use a drain hose extension, its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. [. . . ]