User manual ARTHUR MARTIN ASI64030X

[. . . ] user manual Dishwasher ASI 64030 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 3 4 5 6 7 8 8 9 11 12 Setting and starting a washing programme 13 Washing programmes 15 Care and cleaning 16 What to do if. . . 17 Technical data 18 Installation 18 Water connection 19 Electrical connection 20 Environment concerns 20 Subject to change without notice During manufacture, this appliance has been built in accordance with the standards, directives and/or regulations applying to its use on French territory. For the safety of person and property, as well as for the respect of the environment, you should first read carefully the following recommendations before making any use of your appliance. [. . . ] Some types of tablets can contain other agents. Do a check if these tablets are applicable for the local water hardness. Refer to the instructions from the manufacturer. When you set the multitab function, it stays on until you deactivate it. The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. The programme duration can increase if you use the multitab function. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again. To activate the multitab function: electrolux 13 · Press and hold the two multitab buttons (function buttons D and E). To deactivate the multitab function: · Press and hold the two multitab buttons (function buttons D and E). Do these steps if the drying results are not satisfactory: 1. Fill the rinse aid dispenser with rinse aid. · You can only activate or deactivate the rinse aid dispenser when the multitab function is activated. To activate/deactivate the rinse aid dispenser: 1. Make sure that the appliance is in setting mode. Press and hold function buttons B and C. ­ The indicator lights for function buttons A, B, and C start to flash. ­ The indicator lights for function buttons A and C go off. ­ The indicator light for function button B continues to flash. ­ The digital display shows the setting. Rinse aid dispenser deactivated Rinse aid dispenser activated 6. [. . . ] A drain hose extension must not be longer than 2 m. The internal diameter must not be smaller than the diameter of the hose. If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot The appliance has a security feature to prevent that dirty water goes back into the appliance. [. . . ]