User manual ARTHUR MARTIN EM2412-W

[. . . ] Unplug the power plug from the wall socket. Before using the oven, confirm that the following instructions are followed. ⷠUse this appliance only for its intended purpose as described in this instruction manual. Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. [. . . ] The appliance is equipped with a mains lead which includes an earth wire for connecting to the earth terminal of your mains plug. The plug must be plugged into a socket that is properly installed and earthed. The wires in this mains lead are coloured in accordance with the following code: · As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals in your plug, proceed as follows. Connect the green-and yellow wire to the terminal in the plug marked with the letter E or the earth symbol ( ) or coloured green or green-and-yellow. Connect the blue wire to the terminal marked with the letter N or coloured black. (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e. Charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. But you can add 20 sec increments using the +20sec Button. The dial may be rotated but this does not affect the current operation and the display remains the same. It becomes effective next time you set the oven manually after you finish the current heating. If you want to change the current setting, firstly stop the heating by using CANCEL Button and set desired power level and cooking time again. But when you are NOT in a heating cycle, you can change the power level and heating time. Changed values are promptly shown in the display. The oven is designed not to work when power level is set to "0" mode between the heating mode and the defrosting mode. When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display window. When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop. For 1 min, the display shows `0` and the cooling fan will keep working in order to cool down the interior parts. During the time, the fan will not stop even when you open the door. [. . . ] If the Air Filter becomes clogged with debris, this will cause an overheating problem on the oven. Disconnect the power cord from the wall socket before attempting installation. For stacking installation, you must use the "bracket plate" which is enclosed with this unit. Stacking the two units is limited to the following models. [. . . ]