User manual ASK PROXIMA DP5900

[. . . ] In some cases, the product may have been delivered to another end-user and then returned. In all cases, the product has undergone testing and quality inspection, meets all of Proxima's requirements for a mew product, and our full warranty terms apply. The end-user's sales receipt or invoice showing the date of purchase of the product and the name of the Reseller is proof of date of purchase. The Warranty extends only to the original purchaser and is not transferable. [. . . ] 2 Insert the plug at the other end into the external amplifier or powered speaker system's Audio In port. 2-14 Chapter Two Chapter 3 Using the Desktop Projector 5500 TURNING ON THE PROJECTOR AND LAMP Power the DP5900 up before the computer. This allows the computer to sense the projector during its start-up sequence. Move the AC POWER switch to the ON position. The ON indicator on the projector control panel glows orange. The lamp is off when you first turn on the projector. Press the STANDBY/ON key on the operator panel for one second to turn the lamp on. The ON indicator blinks green for a few seconds while the lamp warms up, and then turns to a steady green color. Never operate the projector if the air intake or exhaust grills are clogged or obstructed, or if the electric fans are not running. Figure 3-1 Projector STANDBY/ON key ON LA M P TE M P IN PU T D AN ST N /O BY Using the Desktop Projector 5500 3-1 FOCUSING AND ZOOMING THE IMAGE You can use the title screen that appears when you first start the projector to make your focus and image size adjustments. 1 Press the ZOOM +/- key on the Control Panel or Remote Control to make the image larger (+) or smaller (-). NOTE: If you have a Cyclops interactive pointer system installed and you change the image size, you will have to recalibrate the Cyclops camera. 2 Adjust the focus using the FOCUS +/- buttons on the Control Panel or Remote Control. Image Size The size of the projected image will change as you move the projector closer to the screen or adjust the zoom lens. The following table indicates the minimum and maximum distance from the projector to the screen for most standard size screens. DISTANCE FROM PROJECTOR TO SCREEN SCREEN SIZE 40 in. 452 in. TURNING OFF THE PROJECTOR 1 Press and hold the STANDBY/ON key on the Control Panel for one second to turn the lamp off. Press the STANDBY/ON key on the control panel to relight the lamp. NOTE: The remote control's STANDBY/ON button will not function after an over-temperature condition until the main power switch is turned off and on and the lamp is turned on from the Control Panel. LAMP Indicator The LAMP indicator flashes red if the air filter door is removed. It will show solid red if the lamp burns out. CAUTION!If the lamp fails during a presentation, make sure that the projector cools for a few minutes with the power off before attempting to change the lamp. See page 4-2 for instructions on changing lamps. The lamp and surrounding parts get very hot. Use appropriate care when changing lamps. Using the Desktop Projector 5500 3-5 USING THE REMOTE CONTROL The remote control contains all the key functions available on the DP5900 control panel, as well as several additional features. For best results, aim the remote control at the projection screen or at the projector's front panel. Do not obstruct the red infrared eye located on the front of the projector. 1 RIGHT RESET STANDBY 2 MENU 13 12 11 10 9 8 INPUT 3 4 + ZOOM + FOCUS ­ TIMER ­ VOL BLANK 5 MUTE SEARCH 6 VIDEO 1/2 RGB 1/2 7 Figure 3-4 Remote Control and Infrared Eye 3-6 Chapter Three KEY 1 2 JOYSTICK RIGHT/RESET FUNCTION Functions as arrow keys or as a mouse. Resets the projector settings to the factory defaults if the menus are open. Functions as a right mouse button if the projector is in Host mode (see page 3-8). 3 4 5 MENU FOCUS +/VOLUME +/- Displays or hides the menu. Decreases or increases the volume of internal and/or external speakers. 6 7 MUTE RGB 1/2 Turns audio on or off. [. . . ] Check power to electrical outlet. Lamp not on. Over temperature indication. Turn lamp ON. Allow projector to cool; turn projector OFF and then ON. Make sure the bottom air filter door is closed. No computer image projected Loose cable. Check and secure cable connections. No power to computer. [. . . ]