User manual ASK PROXIMA IMPRESSION 880

[. . . ] FAST TRACK SVGA LCD MULTIMEDIA PROJECTOR SETTING UP 1. Place the projector on a stable, hard surface, at the desired distance from the projection screen. Insert the end of the VGA cable marked ` LCD'into the computer connector port on the LCD projector. Connect the connector marked ` Monitor'onto your monitor cable, and the connector marked ` VGA' into the , VGA port on the PC unit. [. . . ] The functions performed by the keys on the remote control are described below. RESET ON/OFF MUTE CONTR BRIGHT VOLUME FREEZE COMPUTER VIDEO S-VIDEO MASK SCALE PAN PROG POINTER TRACKERBALL PLATE LIGHT MENU LEFT KEY RIGHT KEY TRACKERBALL BOTTOM KEY 25 USER GUIDE SVGA LCD MULTIMEDIA PROJECTOR The MEM column indicates whether the function setting is memorized for the source apparatus for future use. KEY RESET FUNCTION Defaults to the standard settings for the active mode. Contrast is the ratio between light and dark colors. Brightness (whiteness) of the image can be altered to suit local lighting conditions. Volume of the audio output can be altered to suit local conditions. Holds the image projected on the screen. This feature can be used to hide actions on the computer that the audience need not see, such as changes between software packages, or for returning the audience' attention s back to the presenter!Selects the computer as the active source. Applies a mask to the image, which can be moved using the trackball. KEY TYPE single touch activated toggle scale (up/down arrows) MEM - ON/OFF CONTR Yes BRIGHT scale (up/down arrows) Yes VOLUME scale (up/down arrows) Yes FREEZE any key to release No COMPUTER VIDEO S-VIDEO MASK single touch activated single touch activated single touch activated toggle - 26 USER GUIDE SVGA LCD MULTIMEDIA PROJECTOR KEY SCALE PAN PROG POINTER LIGHT MENU TRACKBALL LEFT KEY RIGHT KEY BOTTOM KEY FUNCTION Selects direct 1:1 mapping or scaling of images. Scaling not applicable in 800 x 600 mode. Allows panning within oversized images using the trackball. Use the trackball to show different areas of the image based on each of the four corners. This key may be programmed to one of the menu controls. Applies a trackball controlled pointer to the screen. The appearance of the pointer can be changed in the options menu (cross/ball/menu). The trackball simulates the actions of the desktop mouse to control the computer cursor. Once the menu is accessed selection are confirmed using LEFT. This emulates the ` clickand-hold'(drag) function of the desktop mouse. Use BOTTOM key instead of LEFT when connected to a Macintosh computer. KEY TYPE toggle MEM No trackball movements - - toggle No toggle toggle trackball movements No No - - - 27 USER GUIDE SVGA LCD MULTIMEDIA PROJECTOR 7. 2 TOP PANEL KEYBOARD All settings are also accessible via a secondary keyboard panel on the top of the LCD projector, known as the Top Panel Keyboard. The Power ON/OFF Indicator is also located on this panel. The buttons function exactly as the corresponding remote control keys. [. . . ] MODE Generic RESOLUTION 640 x 350 640 x 400 640 x 480 720 x 480 800 x 600 1024 x 768 (compressed) 640 x 350 640 x 400 640 x 480 720 x 400 800 x 600 1024 x 768 (compressed) 640 x 480 832 x 624* 1024 x 768 (compressed) 1152 x 870 (compressed) MAXIMUM VERTICAL FREQUENCY (Hz) 85 85 85 85 100 100 85 85 85 85 100 100 85 (75 Hz default) 100 (75 Hz default) 100 (75 Hz default) 90 (75 Hz default) VGA SVGA XGA MAC * MAC 832x624 mode is projected at 800 x 600 resolution and therefore a few lines vertically and horizontally at the edge of the MAC images at 832 x 624 will not be visible. The image is not compressed and cannot be panned around using the remote control. 45 USER GUIDE SVGA LCD MULTIMEDIA PROJECTOR 12. 6 CONNECTORS ON THE SUPPLIED CABLES The connectors on the supplied cables are described below. CABLE VGA 4m/13 ft Vsplit cable PROJECTOR END 26 pin HDDSUB male with fingerscrews SOURCE END 1 2 (if applies) Computer end: Monitor end: 15 pin HDDSUB 15 pin male with HDDSUB fingerscrews female with nuts Mouse cable 8 pin mini DIN male 8 pin mini DIN male - Mouse adapter cable (serial) 8 pin mini DIN female Computer end: 9 pin DSUB female with fingerscrews Computer end: 4 pin mini DIN female (MAC ADB style) Video end: 3 x RCA male Mouse end: 9 pin DSUB male with nuts Mouse end: 4 pin mini DIN female (MAC ADB style) - MAC mouse adapter 8 pin mini DIN female A/V 4m/13 ft cable Dual ended: one RCA male and one 3. 5 mm male stereo jack 46 USER GUIDE SVGA LCD MULTIMEDIA PROJECTOR 13 CONNECTORS The connector ports for the source equipment on the LCD projector are located on the right hand-side (when facing) of the unit. The connector port for the mains power cord is located next to the fuse cabinet. [. . . ]