User manual ASK PROXIMA PRO AV 9320L

[. . . ] 3 Adjusting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selecting the Color Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Zooming an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Momentarily Cutting Off the Input Source Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use this sub-menu to adjust the horizontal position of the input source image within the projection area. When vertical bands appear in the projected image while RGB is selected as the input source, it means that the frequency setting is not correct. When this happens, use this setting to adjust the frequency manually. RCV R Important! If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUTO] key to perform an auto adjust operation, which should cause the image to appear. Phase R Signal Specific When there is flickering in the projected image while RGB is selected as the input source, it means that the phase setting is not correct. When this happens, use this setting to adjust the phase manually. This setting is valid when VIDEO is selected as the input source. Use it to select a mode that is optimized for movies or still images. Still Image: Optimized for still images. In particular, this setting should be used when projecting still images from a digital camera connected to the projector's VIDEO terminal. Use this sub-menu to return all of the sub-menu items on the Image Adjustment main menu to their initial default settings. Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. Note that the "Keystone Correction", "Projection Mode", "Startup Screen", "No Signal Screen", and "Blank Screen" settings are always returned to their initial defaults, regardless of the currently selected input source. Restore Menu Defaults RCVUN Source Specific 18 Input Settings Main Menu Setting Name RGB Input Input RCUVN Setting Unit Single Description Use this sub-menu to specify manually the type of signal being input from the projector's RGB input terminal. Auto*: Automatically detects the signal being input from the RGB input terminal and configures the appropriate input protocol. RGB: Select this option when a computer is connected to the RGB input terminal. For details about connecting a computer, see "Connecting a Computer to the Projector" in the "User's Guide". Component: Select this setting when the projector's RGB input terminal is connected to the component video output terminal of a video device using an optionally available YK-3 component video cable. For information about connection, see "Connecting to a Component Video Output Device" on page 32. Use this sub-menu to specify manually the type of signal being input from the projector's VIDEO input terminal. Auto*: Select this setting to have the projector switch the video signal system automatically in accordance with the input signal from the video device that is connected to the VIDEO input terminal. NTSC / NTSC4. 43 / PAL / PAL-M / PAL-N / PAL60 / SECAM: Each setting selects the applicable video system. Use these settings when you want to specify only one specific video signal for the VIDEO input terminal. Use this sub-menu to specify whether or not the name of the currently selected signal source should be displayed in the projected image. [. . . ] Wait for about 60 minutes to allow the projector's current lamp to cool down completely. Turn over the projector and place it on top of a desk or on some other stable surface. Loosen the lamp cover screw, and then remove the lamp cover. Lamp cover 5 Loosen the three screws indicated by an mark. Lamp cartridge 28 6 Use the lamp cartridge handle to pull the lamp cartridge from the projector. 7 Insert the new lamp cartridge as far as it will go, as shown in the illustration. After inserting the lamp cartridge, lay its handle down in the position shown in the illustration under step 5 on this page. Make sure the grooves of the lamp cartridge align with the grooves of the lamp housing. Caution Take care to avoid touching the lamp (glass) and the mirrors inside the projector. Doing so can cause the lamp to rupture, shorten lamp life, and otherwise affect lamp performance. 8 9 Secure the lamp cartridge with the three screws. [. . . ]