User manual ASKO 1805 QUICK START GUIDE

[. . . ] Rinse Aid Indicator Glows red when the rinse aid dispenser needs to be refilled. Start 5 Pans Normal Quick Rinse Econom y Temp Heat dry Delay Stop Touchpad Controls Press these touchpads to select programs and options. Start After you've selected the desired wash program and options, press this touchpad and close the door to start the dishwasher. Note: When you press Start, the red indicator lights flash rapidly, alternating from left to right, to show that the machine is ready to start. The dishwasher will start when the door is shut completely. WASH PROGRAMS AND OPTIONS Your ASKO dishwasher has four wash programs as well as several other options specifically designed to reduce your energy costs and make your life easier. Press the On/Off button to turn the machine on, then select the desired program and option(s). Wash Programs For the heaviest soiled loads, such as pots, pans, casseroles, etc. Pans Options When used with the low temperature settings, this option further reduces energy consumption without diminishing cleaning performance by lowering the water temperature in the prewash and main wash and extending the wash time. Lets you select a high or low water temperature for the wash programs (except Rinse). [. . . ] Make sure there is rinse aid in the dispenser. Add automatic dishwashing detergent and close the dispenser cover. (See "Amount of Detergent to Use" below. ) 5. Press the On/Off button on the left side of the control panel. Select the desired wash program and option(s). A red light appears above the selected touchpad(s). The panel lights will flash rapidly left to right to indicate the unit is ready. The dishwasher will start. Refer to this Refer to this page in the Use & page in Care Guide. the Use 4 & Care3, Guide. 3 5, 6 4, 5 AMOUNT OF DETERGENT TO USE We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5. ) In any case, you should never use more than three tablespoons of detergent. TEMPERATURE TEMPERATURE OPTIONS You can select high or low water temperatures for the wash programs (except Rinse). The table to the right shows the temperature options for each program. We recommend that you use the lower temperature settings whenever possible to conserve energy. Temperature Options Program Pans Normal Quick High 160° 150° 130° Low 130° 130° 120° Temp The indicator light glows if the temperature is set on high and it remains black if set on low. Once you select a temperature option, it will remain selected until you change it (except the Quick wash, which reverts to 130° F). PROGRAM STAR ARTED CHANGING A PR OGRAM AFTER YOU'VE STARTED THE UNIT The dishwasher is programmed to stop operating if the door is opened during a cycle. If you want to change a program or option after you start the machine, open the door slightly to let the spray arms stop rotating and avoid getting sprayed with water. Press and hold Start for five seconds to cancel the current selection then press the touchpad(s) for your desired selection. [. . . ] See "Understanding the Indicator Lights" above. See "Understanding the Indicator Lights" above. If the temperature of the water entering your dishwasher is below 120°, the dishwasher runs longer because it heats the water to the proper temperature for the program selected. Raising your water heater setting may help shorten the cycle times. [. . . ]