User manual ASKO DBI2348IB.B

[. . . ] 18 If the dishwasher is turned off due to a power failure . 26 Clean the dishwasher inside and out . 37 Adjust the height and slide the dishwasher into place . We want them to help make the world a better place ­ improving quality of life for you and your loved ones. [. . . ] For adjusting the contrast of the display. You can select which information is shown on the display. This sound is used to confirm each button press. The buzzer indicates when a dishwashing program has ended. Error messages are always indicated by a loud buzzer. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High dosage). increase the rinse aid dosage: · If the dishes have water marks. decrease the rinse aid dosage: · If the dishes have a sticky white/blue film. If you have very soft water, The rinse aid can be diluted 50:50 with water. When using an all-in-one detergent that contains rinse aid, you can activate the setting TAB. Activate the setting Extra Dry to improve the drying results. energy consumption is slightly increased. Activated in the following programs (although not if the Auto Open option is selected): Eco Auto Intensive Quick Select a setting depending on the hardness of the water supply. Do not forget to put salt in the salt compartment after you have set the water softener to 1 - 9. For a water supply with a hardness under 6°dH (9°fH), select 0. the water softener is deactivated and no salt is needed. To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector When the rinse aid needs topping up, the above symbol lights on the display. Carefully top up with rinse aid to the level marked max. Wipe up any splashes of rinse aid around the compartment. After topping up, it may take a while before the symbol goes out. top up salt When the salt needs topping up, the above symbol lights on the display. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. [. . . ] This specification must match the electricity supply. The dishwasher must be connected to an earthed socket. The electric wall socket must be placed outside of the installation area to be easily accessible after installing the dishwasher. Any repair and maintenance pertaining to safety or performance should be done by trained experts. [. . . ]