User manual ASKO W660 QUICK START GUIDE

[. . . ] Refer to "Preset Programs" below for a definition of these programs. Preset Programs Press one of these buttons to select a program. LED Window Displays the wash program, spin speed, temperature settings, and program run time. Power Button Press to turn on power to the machine. P1 P2 P3 P4 Power Indicator Light Glows when the power is turned on. Start/Stop M enu E n te r Start/Stop Button Press to start or stop a program. Door Open Button Press to open the glass door. Program Selection Controls These buttons allow you to customize the preset program settings, such as wash temperatures, spin speed, rinses, display language, etc. [. . . ] Simply press the button for the preset program you want to use then follow the instructions below. The settings will revert to normal at the end of the program. Temperature ­ Press until the desired temperature displays in the LED window. If you also want to change the spin speed, read the following paragraph, otherwise, press Start. Spin Speed ­ Press until the desired spin speed displays in the LED window then press Start. QUICK START PROCEDURES 1. 4. W640/W660 Press the Power button to turn on the machine. to open the inner door and load the wash. (The door will open in a few seconds. ) Press the Door Open button Check that the door is clear of laundry then close it firmly. (The door won't shut if it's slammed. ) Pour the detergent and fabric softener into the proper compartments in the detergent drawer, as illustrated below. (Don't put detergent in the prewash compartment unless you plan to prewash. ) 5. Press the button for the desired program. If desired, change the temperature and/or spin speed. [. . . ] More heavily soiled items, however, may need slightly more detergent. Also, the amount of detergent needed can vary due to differences in water hardness. [. . . ]