User manual ASROCK A55ICAFE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASROCK A55ICAFE. We hope that this ASROCK A55ICAFE user guide will be useful to you.
Lastmanuals help download the user guide ASROCK A55ICAFE.
You may also download the following manuals related to this product:
ASROCK A55ICAFE BROCHURE (565 ko)
Manual abstract: user guide ASROCK A55ICAFE
Detailed instructions for use are in the User's Guide.
[. . . ] A55iCafe
User Manual
Version 1. 0 Published August 2011 Copyright©2011 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] The LED is on when the system is operating. The LED is off in S3/S4 state or S5 state (power off). Please connect the fan cables to the fan connectors and match the black wire to the ground pin. CHA_FAN1/2/3 fan speed can be controlled through UEFI or AXTU.
Power LED Header (3-pin PLED1) (see p. 11 No. 19)
1
PLEDPLED+ PLED+
Chassis and Power Fan Connectors (4-pin CHA_FAN1) (see p. 11 No. 18) GND FAN_SPEED_CONTROL +12V CHA_FAN_SPEED
(3-pin CHA_FAN2) (see p. 11 No. 6)
27
CPU Fan Connectors FAN_SPEED_CONTROL CPU_FAN_SPEED (4-pin CPU_FAN1) +12V
(see p. 11 No. 4)
GND
Please connect the CPU fan cable to the connector and match the black wire to the ground pin.
1 2 3 4
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
Pin 1-3 Connected 3-Pin Fan Installation
(3-pin CPU_FAN2) (see p. 11 No. 5)
GND +12V CPU_FAN_SPEED
ATX Power Connector (24-pin ATXPWR1)
(see p. 11 No. 12)
12
24
Please connect an ATX power supply to this connector.
1
13 12 24
Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.
20-Pin ATX Power Supply Installation
1
13
ATX 12V Power Connector (8-pin ATX12V1)
(see p. 11 No. 1)
4 1
8 5
Please connect an ATX 12V power supply to this connector.
Though this motherboard provides 8-pin ATX 12V power connector, it can still work 4 8 if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 5.
4-Pin ATX 12V Power Supply Installation
1 5
Serial port Header
(9-pin COM1) (see p. 11 No. 26)
This COM1 header supports a serial port module.
28
HDMI_SPDIF Header (2-pin HDMI_SPDIF1) (see p. 11 No. 27)
HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header.
29
2. 10 Serial ATA (SATA) / Serial ATA2 (SATA2) Hard Disks Installation
This motherboard adopts AMD A55 FCH (Hudson-D2) chipset that supports Serial ATA (SATA) / Serial ATA2 (SATA2) hard disks and RAID (RAID 0, RAID 1 and RAID 10) functions. You may install SATA / SATA2 hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA / SATA2 hard disks. STEP 1: Install the SATA / SATA2 hard disks into the drive bays of your chassis. STEP 2: Connect the SATA power cable to the SATA / SATA2 hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA2 connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATA2 hard disk.
2. 11 Hot Plug and Hot Swap Functions for SATA / SATA2 HDDs
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATA2 in RAID / AHCI mode. [. . . ] Choose Ld Size setting, and key in the Raid size.
13. After set up Raid size, please click Start to Create.
14. During reboot, please press <F11> to enter Boot Manual. Choose UEFI: SCSI CD/DVD Drive.
* This option only shows on Windows® 7 64-bit and VistaTM 64-bit OS.
60
16. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK A55ICAFE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK A55ICAFE will begin.
