User manual ASROCK G31M-VS_VIA

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASROCK G31M-VS_VIA. We hope that this ASROCK G31M-VS_VIA user guide will be useful to you.

Lastmanuals help download the user guide ASROCK G31M-VS_VIA.

Download

Manual abstract: user guide ASROCK G31M-VS_VIA

Detailed instructions for use are in the User's Guide.

 [. . . ] G31M-VS User Manual

Version 1. 1 Published June 2009 Copyright©2009 ASRock INC. All rights reserved. 

1

Copyright Notice:
No part of this manual may be reproduced,  transcribed,  transmitted,  or translated in any language,  in any form or by any means,  except duplication of documentation by the purchaser for backup purpose,  without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies,  and are used only for identification or explanation and to the owners’ benefit,  without intent to infringe. 

Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice,  and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual.  [. . . ] If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard,  please connect it to Pin 1-3. 
Pin 1-3 Connected 3-Pin Fan Installation

ATX Power Connector
24 13 1

(24-pin ATXPWR1) (see p. 10 No. 4)
12

Please connect an ATX power supply to this connector. 

Though this motherboard provides 24-pin ATX power connector,  it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply,  please plug your power supply along with Pin 1 and Pin 13. 
24 13

20-Pin ATX Power Supply Installation

12

1

21

ATX 12V Connector
(4-pin ATX12V2) (see p. 10 No. 2)

Please note that it is necessary to connect a power supply with ATX 12V plug to this connector so that it can provides sufficient power. Failing to do so will cause the failure to power up. 

22

2. 9

SAT SATAII Hard Disk Setup Guide

Before installing SATAII hard disk to your computer,  please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode,  which operate with the best performance. In order to enable SATAII function,  please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise,  your SATAII hard disk may fail to run at SATAII mode. Western Digital
7 8 5 6 3 4 1 2

If pin 5 and pin 6 are shorted,  SATA 1. 5Gb/s will be enabled. On the other hand,  if you want to enable SATAII 3. 0Gb/s,  please remove the jumpers from pin 5 and pin 6. SAMSUNG
7 8 5 6 3 4 1 2

If pin 3 and pin 4 are shorted,  SATA 1. 5Gb/s will be enabled. On the other hand,  if you want to enable SATAII 3. 0Gb/s,  please remove the jumpers from pin 3 and pin 4. HITACHI Please use the Feature Tool,  a DOS-bootable tool,  for changing various ATA features. Please visit HITACHI’s website for details: http://www. hitachigst. com/hdd/support/download. htm

The above examples are just for your reference. For different SATAII hard disk products of different vendors,  the jumper pin setting methods may not be the same. Please visit the vendors’ website for the updates. 

23

AT (SAT AT (SAT 2 . 1 0 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation
This motherboard adopts Intel® ICH7 south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA / SATAII hard disks. STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis. STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. 

2 .  [. . . ] AddOn ROM Display Use this option to adjust AddOn ROM Display. If you enable the option “Full Screen Logo” but you want to see the AddOn ROM information when the system boots,  please select [Enabled]. Configuration options: [Enabled] and [Disabled]. The default value is [Enabled]. 

40

Boot From Onboard LAN Use this item to enable or disable the Boot From Onboard LAN feature.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK G31M-VS_VIA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK G31M-VS_VIA will begin.