User manual ASROCK K10N78M

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASROCK K10N78M. We hope that this ASROCK K10N78M user guide will be useful to you.

Lastmanuals help download the user guide ASROCK K10N78M.

Download

You may also download the following manuals related to this product:

ASROCK K10N78M INSTALLATION (3994 ko)

ASROCK K10N78M INSTALLATION GUIDE (3994 ko)

ASROCK K10N78M QUALIFIED VENDOR LIST (39 ko)

Manual abstract: user guide ASROCK K10N78M

Detailed instructions for use are in the User's Guide.

 [. . . ] K10N78M
User Manual

Version 1. 0 Published February 2009 Copyright©2009 ASRock INC. All rights reserved. 

1

Copyright Notice:
No part of this manual may be reproduced,  transcribed,  transmitted,  or translated in any language,  in any form or by any means,  except duplication of documentation by the purchaser for backup purpose,  without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies,  and are used only for identification or explanation and to the owners' benefit,  without intent to infringe. 

Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice,  and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual.  [. . . ] HITACHI Please use the Feature Tool,  a DOS-bootable tool,  for changing various ATA features. Please visit HITACHI's website for details: http://www. hitachigst. com/hdd/support/download. htm
The above examples are just for your reference. For different SATAII hard disk products of different vendors,  the jumper pin setting methods may not be the same. Please visit the vendors' website for the updates. 

31

AT (SAT AT (SAT 2 . 1 1 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation
This motherboard adopts NVIDIA® GeForce 8100 chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID functions. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA / SATAII hard disks. STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis. STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. 
If you plan to use RAID 0,  RAID 1 or JBOD function,  you need to install at least 2 SATA / SATAII hard disks. If you plan to use RAID 5 function,  you need to install 3 SATA / SATAII hard disks. If you plan to use RAID 0+1 function,  you need to install 4 SATA / SATAII hard disks. 

Functions SAT SAT 2. 12 Hot Plug and Hot Swap Functions for SATA / SATAII HDDs
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII in RAID / AHCI mode. NVIDIA® GeForce 8100 chipset provides hardware support for Advanced Host controller Interface (AHCI),  a new programming interface for SATA host controllers developed thru a joint industry effort. AHCI also provides usability enhancements such as Hot Plug. NOTE What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration,  it is called "Hot Plug" for the action to insert and remove the SATA / SATAII HDDs while the system is still power-on and in working condition. However,  please note that it cannot perform Hot Plug if the OS has been installed into the SATA / SATAII HDD. 

What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 or RAID 5 then it is called "Hot Swap" for the action to insert and remove the SATA / SATAII HDDs while the system is still power-on and in working condition. 

32

SAT SAT Feature 2. 13 SATA / SATAII HDD Hot Plug Feature and Operation Guide
This motherboard supports Hot Plug feature for SATA / SATAII HDD in RAID / AHCI mode. Please read below operation guide of SATA / SATAII HDD Hot Plug feature carefully. Before you process the SATA / SATAII HDD Hot Plug,  please check below cable accessories from the motherboard gift box pack. SATA power cable with SATA 15-pin power connector interface A. SATA power cable

SATA 7-pin connector

The SATA 15-pin power connector (Black) connect to SATA / SATAII HDD

1x4-pin conventional power connector (White) connect to power supply

Caution
1. Without SATA 15-pin power connector interface,  the SATA / SATAII Hot Plug cannot be processed.  [. . . ] Enabled: Displays OEM Logo instead of POST messages. 

+F1 F9 F10 ESC

Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit

v02. 54 (C) Copyright 1985-2003,  American Megatrends,  Inc. 

Full Screen Logo Use this item to enable or disable OEM Logo. AddOn ROM Display Use this option to adjust AddOn ROM Display. If you enable the option "Full Screen Logo" but you want to see the AddOn ROM information when the system boots,  please select [Enabled]. Configuration options: [Enabled] and [Disabled].  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK K10N78M

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK K10N78M will begin.