User manual ASTAR LTV-3001 INSTRUCTION MANUAL

[. . . ] 30" TFT LCD TV INSTRUCTION MANUAL MODEL: LTV-3001 Please read all the safety and operating instructions carefully before you begin. Safety class This is an IEC safety class I product and must be grounded for safety. CONTENTS IMPORTANT SAFETY INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 PREFACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING AND CAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not mix new and old batteries of different types/brands. -14- REMOTE CONTROL DESCRIPTION 1 10 2 6 3 9 12 4 11 20 18 19 5 8 17 7 16 15 13 14 1. POWER (STAND BY) BUTTON ( ) Press this button to turn on or turn off (Standby mode). Press Power Button, picture and sound will appear on within a few seconds. 2. PROGRAM SELECTION BUTTON (0-9 BUTTONS) Push the number for your desired program and the program indicator will be displayed on the screen. 1. To input a one-digit number(0-9):press button to display"-", then press 0-9 digit button. 2. To input a two-digit number(10-99):press button to display "--", then press two digit button in order to input the channel number. For example, you need channel 25, please input "2" button followed "5" button. 3. To input a three-digit number(100-135):press button to display "---", then press three digit button in order to input the channel number. 3. VOL+/- BUTTONS (VOL+/-)(TV top control key) Press VOL+/- buttons to adjust sound level. -15- REMOTE CONTROL DESCRIPTION 4. CH+/- BUTTON(TV top control key) 1. Press the CH+/- button to select the program forwards. 2. Press the CH+/- button to select the program backwards. (Use these two buttons for Page Up/Down to increase/decrease page number in TELETEXT mode, option) 5. MENU BUTTON(TV top control key) Use "MENU" button for the tuning procedure, please refer to page19-27 for the details. 6. SLEEP BUTTON This key is used to set the sleep timer from 10 minutes to 240 minutes. Time will display on bottom-right corner and decrease in second when one minute left. Monitor will go into stand by mode when time off. To switch off this function, Press this key step by step until "off" display. 7. DISPLAY BUTTON Press this button to recall program number, system etc on the screen. 8. RECALL BUTTON Press this button to return to the previously viewed program. 9. SOURCE SELECT BUTTON ( ) (TV top control key) Press this button to display external video signal such as VCR or DVD player. *Remark: PC DVI TV AV1 AV2 S-VIDEO YCbCr HDTV 10. MUTE BUTTON ( ) Press once to mute the sound, press again to return to previous sound level. 11. MONO/STEREO BUTTON ( ) (OPTION) As stereo program is received. You can select STEREO/MONO/Dual A/Dual B or MONO/STEREO/SAP or FM/A2/Germem stereo/BTSC/Nicam by pressing the button. 12. PIP BUTTON The PIPfunction is workable when the main picture is only PC signal at 1024 at Full Screen 13. SOUND BUTTON Press this button is to select the sound mode:Personal/Cinema/Music/Speech. 14. PICTURE BUTTON Press this button to select the user picture mode:Personal/Bright/Mild/Standard. 15. Auto BUTTON Press this button to automatically adjust picture. 16. Screen BUTTON Press this button to select the screen format:Fill Screen/4:3/Wide /Cinema/Smart/14:9. (Video Format) 768/60Hz and wide format video signal -16- REMOTE CONTROL DESCRIPTION 17. CCD Press this button to setup CCD 18. V-CHIP Press this button to setup V-CHIP 19. FREEZE Press this button to hold the current video picture, Press the button twice to canncel. TV Signal TV 13:15 13:15 Current time CH 9 I TV channel and soundformat CH 9 I 20. SYSTEM BUTTON Press this button to select TV/IRC/HRC/STD format at NTSC TV signal. -17- OPERATION INSTRUCTIONS TURN ON/OFF 1. Insert the AC plug into a conveniently located AC outlet (100-240VAC, 50/60Hz). Press the to select the signals *Remark: PC DVI TV AV1 AV2 S-VIDEO YCbCr HDTV If no input signal, then a blue background appears. [. . . ] 3. Current program---press or to switch the channel. 4. Add/Erase --- press or to select add or erase the current channel. you can select the channel by the Current prog menu by the number buttons if you want to switch to the skipped channel, then switch the add. 6. Auto Search --- Press or broadcast channels for you. 7. Fine Tune --- press to select Auto search, press or to begin searching and storing all available or to enter the menu, then press or continue to tune the effect of picture. 1 Fine Tuning 1 <Left> or <Right> key to Change Note: Press menu will end the auto search during searching, but automatic tuning will not be completed. -22- OPERATION INSTRUCTIONS ANALOG RGB AND DVI Following modes are strongly suggested for set up mode. RESOLUTION V. Freq. (Hz) 640x480 800x600 1024x768 1280x768 59. 940 60. 317 60. 004 59. 870 H. Freq. (KHz) 31. 469 37. 879 48. 363 47. 776 GRAPHIC MODE VGA VGA VGA VGA PICTURE SETTING Press or to select the item you want to alter, then press or to adjust it. <Left> or <Right> key to change Item Brightness Contrast Phase Frequency USER_R USER_G USER_B Darker Weaker Decrease Left Weaker Weaker Weaker Lighter Stronger Increase Right Stronger Stronger Stronger Color Temp --- press or to select the color temperature. NB: The DVI input only fit with VIDEO player. -23- OPERATION INSTRUCTIONS PICTURE POSITION 1. [. . . ]