User manual ASUS E790

[. . . ] Voice Gateway & Pocket Voice Gateway H. 323 and MGCP Protocols User's Manual USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of THE MANUFACTURER. THE MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE MANUFACTURER, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF THE MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by THE MANUFACTURER; or (2) the serial number of the product is defaced or missing. [. . . ] [prompt] No use this number to index the table. IP define the IP address corresponding to the phone number. set_ac <Usage> : set_ac Use this command to enable/disable the function of auto insertion of the area code [option] ?[prompt] Area-Code enter the area code here to enable auto insertion. set_nat <Usage> : set_nat Use this command to set no answer time [option] ?[prompt] nat set no answer time set_shp <Usage> : set_shp Use this command to enable/disable sharp flag `#' support (end of phone no) [option] ?[prompt] shp Enable/Disable sharp flag `#' support set_autoswitch <Usage> : set_autoswitch Use this command to enable/disable auto-switch support [option] ?[prompt] Enable/Disable auto-switch support 24 Voice Gateway / Pocket Voice Gateway 5. System Configuration set_dtmfrelay <Usage> : set_dtmfrelay Use this command to select a DTMF rely protocol 5. MGCP Commands [MG] (Valid only on MGCP client) info This will show all information of MGCP gateway setting. It includes Profile ID, Call agent information, Endpoint information. . restart This will restart the MGCP gateway. It will re-activate using the parameter stored in the system help Display help menu. back Return root command group. set_profile <Usage> : set_profile [number] | [option] number Set up MGCP profile, there are three basic profiles : RFC 2705 NCS MGCP 0. 1 NCS 1. 0 (CLARENT) [option] ?After changing MGCP profile MG will automatically restart. show_profile <Usage> : show_profile [option] Show MGCP profile detail. all Show all profile. set_ca <Usage> : set_ca [option] Set up Call Agent (CA) information of MG. Follow the prompt to complete the setting. Display this help [prompt] localname The local name of CA, max 32 characters allowed. Type "NULL" to clear. Voice Gateway / Pocket Voice Gateway 25 5. System Configuration Domain | IP The Domain name or IP of the CA. "1. 2. 3. 4" or "yourCA. company. com". If Domain name is used, use "set_dns" to set up DNS. Type "NULL" to clear the entry. Port The port number of CA, 1024 ~ 65535, usually 2427 or 2727. After setting CA information, MG will automatically restart. show_ca <Usage> : show_ca [option] Show the CA information of MG and current NotifiedEntity of all endpoints. Display this help set_gwname <Usage> : set_gwname [option] Set MG's DomainName. [. . . ] The similar setting have to support in setting of Call Agent. Then the voice gateway can make phone call well. If the voice gateway cannot connect to server well, you still can use the function of inner conference call. So, you can hear the dial tone also while you pick up the phone. [. . . ]