User manual ASUS E915

[. . . ] E915 ADSL Modem / Router User's Guide Copyright No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of The Manufacturer. THE MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE MANUFACTURER, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF THE MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by The Manufacturer; or (2) the serial number of the product is defaced or missing. [. . . ] Write down your network configuration (information supplied by your ISP or Internet Service Provider) in the preceding table to help you gain a clearer view of your network. PSTN (3) WAN VPI/VCI (4) LLC/VC MUX (5) Login Username (6) Login Password (7) Ethernet IP Address CONTENT PROVIDER Internet ATM SWITCH Splitter POWER STATUS LINE PC TEST ADSL MODEM PC DSLAM ROUTER/GATEWAY LOCAL CONTENT PROVIDER (1) Access Concentrator Name (2) Service Name (8) PC LAN IP Address (9) PC Default Gateway TELEPHONE Setup Item (1) Access Concentrator Name (2) Service Name (3) WAN VPI/VCI (4) LLC/VC MUX (5) Login Username (6) Login Password (7) Ethernet IP Address (8) PC LAN IP Address (9) PC Default Gateway Example ADSL_TEST_SVR Your Configuration Test 14/32 1 (LLC) Test Test 192. 168. 31. 228 192. 168. 31. 223 192. 168. 31. 228 26 ADSL Modem/Router User's Guide 4. Basic Configuration Enter the name required to login to your service provider. Enter the password required to login to your service provider. Service Provider - Remote server will automatically assign WAN IP Address. Customized - User can enter a WAN IP Address below. WAN IP Address: Manually specify a WAN IP address (must also setup the Default Gateway in the Routing Table Maintenance) (Provided by your Internet Service Provider) Access Concentrator Name: Manually specify the name of the server. Service Name: Manually specify the name of the service. PPP startup status: Up - login to service provider after connection is established Down - don't login to service provider after connection is established DOD: Enable - Bring up PPP when network activity is detected Disable - Do not use dial-up on demand Idle Timeout: Disconnect automatically when connected computers reach this amount of inactivity time. Function: NAT (Network Address Translation) - check to enable. Click Submit after selections are completed and restart the modem. User Name: Password: Confirm Password: Get IP Address from: NOTE: You must also setup the Ethernet Configuration and setup the Default Gateway in the Routing Table Maintenance (Default Gate required for manual WAN IP). ADSL Modem/Router User's Guide 27 4. Basic Configuration 4. 1. 7 MPoA Routed over MAC Setup Wizard The network configuration for this mode can be illustrated as follows. Write down your network configuration (information supplied by your ISP or Internet Service Provider) in the preceding table to help you gain a clearer view of your network. (2) WAN VPI/VCI (3) WAN IP Address (4) LLC/VC MUX (5) Default Gateway IP Address (6) Ethernet IP Address CONTENT PROVIDER PSTN Internet ATM SWITCH Splitter POWER STATUS LINE PC TEST ADSL MODEM PC DSLAM ROUTER/GATEWAY LOCAL CONTENT PROVIDER (1) Router IP Address TELEPHONE (7) PC LAN IP Address (8) PC Default Gateway Setup Item (1) Router IP Address (2) WAN VPI/VCI (3) WAN IP Address (4) LLC/VC MUX (5) Default Gateway IP Address (6) Ethernet IP Address (7) PC LAN IP Address (8) PC Default Gateway Example 192. 168. 3. 1 14/32 192. 168. 3. 223 1 (LLC) 192. 168. 3. 1 192. 168. 31. 228 192. 168. 31. 223 192. 168. 31. 228 Your Configuration (For Service Provider Use) 28 ADSL Modem/Router User's Guide 4. Basic Configuration Get IP Address from: Service Provider - Remote server will automatically assign WAN IP Address. Customized - User can enter a WAN IP Address below. WAN IP Address: Manually specify a WAN IP address (Provided by your Internet Service Provider) Subnet Mask: Function: Subnet mask on the WAN (line) interface (Provided by your Internet Service Provider) NAT (Network Address Translation) - check to enable. Click Submit after selections are completed and restart the modem. NOTE: You must also setup the Ethernet Configuration and setup the Default Gateway in the Routing Table Maintenance. ADSL Modem/Router User's Guide 29 4. Basic Configuration 4. 2 Set Ethernet Configuration The Ethernet interface setting and the user's LAN can be illustrated as follows: PSTN (1) Modem Ethernet IP Address CONTENT PROVIDER Internet ATM SWITCH Splitter POWER STATUS LINE PC TEST ADSL MODEM PC DSLAM ROUTER/GATEWAY LOCAL CONTENT PROVIDER TELEPHONE (2) PC Ethernet IP Address (3) PC Default Gateway Ethernet Setup Example Your Configuration (1) Modem Ethernet IP Address 192. 168. 31. 228 (2) PC Ethernet IP Address (3) PC Default Gateway 192. 168. 31. 223 192. 168. 31. 228 Set Ethernet Configuration lets you set the following: NOTE: The web console HTTP address and the modem's default Ethernet IP address are both 192. 168. 1. 1. Your computer will require TCP/IP settings to match TCP/IP settings made here. 30 ADSL Modem/Router User's Guide 4. Basic Configuration 4. 3 Routing Table Maintenance Routing Table List: This displays existing routing table entries. When you submit this form, it will appear here. Action Item: Name Index: Print, Add (but not saved), Delete, Flush, Save (saved to flash memory) Arbitrary name specified to "Add" that can be used to delete the route using "Delete". Destination Address: The IP address of the network being routed to. Netmask: The subnet mask of the network being routed to. Gateway Address: The IP address of the next-hop gateway for the route. Metric: Note: The number of hops counted as the cost of the route. [. . . ] Verify the driver location and click Next. Press Finish to complete the "ADSL VVBus" driver installation. ADSL Modem/Router User's Guide 43 Appendix Installation in Windows 2000 (Cont') 8. Then, Windows will detect the second device, "ADSL VVB gateway". (The driver disk should still be in your drive "A". ) 10. [. . . ]