User manual ASUS ES5000-P ES5000/ES5000P USER’S MANUAL(ENGLISH)

[. . . ] SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. [. . . ] Configuration options: [Auto] [Optimized] [Extreme]. [Auto] Allows you to set the Auto mode. [Optimized] Allows you to set the ASUS optimized phase tuning profile. [Extreme] Allows you to set the full phase mode. CPU Voltage [Offset Mode] CPU Offset Mode Sign [+] [Manual Mode] Allows you to set a fixed CPU voltage. [Offset Mode] Allows you to set the Offset voltage. This item appears only when you set the CPU Voltage item to [Offset Mode]. [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. CPU Offset Voltage [Auto] This item appears only when you set the CPU Voltage item to [Offset Mode] and allows you to set the Offset voltage. The values range from 0. 005V to 0. 635V with a 0. 005V interval. CPU Manual Voltage [Auto] This item appears only when you set the CPU Voltage item to [Manual Mode] and allows you to set a fixed CPU voltage. The values range from 0. 800V to 1. 990V with a 0. 005V interval. Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable. iGPU Voltage [Offset Mode] iG PU Offset Mode Sign [+] [Manual Mode] Allows you to set a fixed iGPU voltage. Configuration options: [All] [1] [2] [3] Chapter 3: BIOS setup Limit CPUID Maximum [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. Enables the No-Execution Page Protection Technology. Forces the XD feature flag to always return to zero (0). Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Allows a hardware platform to perform adjacent cache line prefetching. Disables this function. Execute Disable Bit [Enabled] Intel® Virtualization Technology [Disabled] [Disabled] [Enabled] Hardware Prefetcher [Enabled] [Disabled] [Enabled] [Disabled] Adjacent Cache Line Prefetch [Enabled] CPU Power Management Configuration CPU Ratio [Auto] Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model. Enhanced Intel SpeedStep Technology [Enabled] [Disabled] [Enabled] [Enabled] The CPU runs at its default speed. The operating system controls the CPU speed. Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST). Turbo Mode [Enabled] [Disabled] Allows processor cores to run faster than marked frequency in specific condition. Disables this function. CPU C1E [Auto] Allows you to enable or disable the CPU C1E. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. [. . . ]