User manual ASUS ESC2000 G2

[. . . ] No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS provides this manual "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASUS, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of use or data, interruption of business and the like), even if ASUS has been advised of the possibility of such damages arising from any defect or error in this manual or product. Specifications and information contained in this manual ae furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. [. . . ] Configuration options: [Disabled] [Enabled] These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. To select the boot device during system startup, press <F8> when ASUS Logo appears. ] [AMI Virtual These items appear only when you connect SATA ODD or hard drive to the SATA ports. CD/DVD ROM Drive BBS Priorities Hard Drive BBS Priorities Network Device BBS Priorities These settings allow you to set the booting order of the SATA devices. 4-48 Chapter 4: BIOS setup [Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program. Setup Mode [EZ Mode] Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. To select the boot device during system startup, press <F8> when ASUS Logo appears. The number of device items that appears on the screen depends on the number of devices installed in the system. 9 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. cPU 1/2; TR1 1/2 Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard component temperatures. Select Ignore if you do not wish to display the detected temperatures. CPU FAN1/2 Speed; FRNT FAN1­4 Speed; REAR FAN1/2 Speed [xxxx RPM] or [Ignore] / [N/A] The onboard hardware monitor automatically detects and displays the speed of CPU fans, front fans, and rear fan in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. 3VSB Voltage FAN Speed Control [Generic Mode] The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. This item allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. configuration options: [Generic Mode] [High Speed Mode] [Full Speed Mode] ASUS ESC2000 G2 4-51 4. 10 Security menu The Security menu items allow you to change the system security settings. aptio Setup Utility - Copyright (C) 2011 American Megatrends , Inc. Main Ai Tweaker Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit Password Description If ONLY the Administrator's password is set, then this only limits access to Setup and is only asked for when entering Setup If ONLY the User's password is set, then this is a power on password and must be entered to boot or enter Setup. [. . . ] The NVIDIA Control Panel window appears (See Step B5). 7-8 Chapter 7: Multiple GPU technology support B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. From the Personalization window, select Display Settings. [. . . ]