User manual ASUS MY CINEMA-PE9400COMBO MY CINEMA SERIES USER’S MANUAL(ENGLISH)

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2. 0 devices. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2. 0 devices. This 15-pin port is for a VGA monitor or other VGA-compatible devices. This port is for any DVI-D compatible device and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. 10. USB 2. 0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports connect to USB 2. 0/1. 1 devices. 1. 10. 2 1. These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ATX12V +12V DC +12V DC ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) Internal connectors EATXPWR GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts MY CINEMA-PE9400COMBO +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND PIN 1 +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 MY CINEMA-PE9400COMBO ATX power connectors • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2. 0 or later version and provides a minimum power of 400W. • DO NOT forget to connect the 4-pin ATX12V power plug. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support. asus. com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. 1-22 GND GND ASUS MY CINEMA-PE9400COMBO E7361_P8H61-M2-TPM-SI R2. 0_Manua22 22 5/16/12 1:44:25 PM 2. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) CHA_FAN MY CINEMA-PE9400COMBO MY CINEMA-PE9400COMBO Fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2. 0 specification that supports up to 480Mbps connection speed. USB 2. 0 connectors (10-1 pin USB78, USB910) USB910 USB+5V USB_P10USB_P10+ GND NC USB78 USB+5V USB_P8USB_P8+ GND NC PIN 1 MY CINEMA-PE9400COMBO PIN 1 USB+5V USB_P9USB_P9+ GND MY CINEMA-PE9400COMBO USB2. 0 connectors Never connect a 1394 cable to the USB connectors. The USB 2. 0 module is purchased separately. 9. This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. Speaker connector (4- pin SPEAKER) SPEAKER +5V GND GND Speaker Out MY CINEMA-PE9400COMBO PIN 1 MY CINEMA-PE9400COMBO speaker out connector 1-26 USB+5V USB_P7USB_P7+ GND ASUS MY CINEMA-PE9400COMBO E7361_P8H61-M2-TPM-SI R2. 0_Manua26 26 5/16/12 1:44:33 PM 10. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. MY CINEMA-PE9400COMBO SPDIF_OUT MY CINEMA-PE9400COMBO Digital audio connector The S/PDIF module is purchased separately. Chapter 1: Product introduction SPDIFOUT GND +5V 1-27 E7361_P8H61-M2-TPM-SI R2. 0_Manua27 27 5/16/12 1:44:34 PM 1. 11 1. 11. 1 Software support Installing an operating system This motherboard supports Windows® XP / Vista / 7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary. Refer to your OS documentation for detailed information. • Ensure that you install Windows® XP Service Pack 3 or later versions / Windows® Vista Service Pack 1 or later versions before installing the drivers for better compatibility and system stability. 1. 11. 2 The Support DVD that comes with the motherboard package contains the drivers, software applications, and utilities that you can install to avail all motherboard features. The contents of the Support DVD are subject to change at any time without notice. Visit the ASUS website at www. asus. com for updates. Support DVD information To run the Support DVD Place the Support DVD to the optical drive. If Autorun is enabled in your computer, the DVD automatically displays the Specials screen. Click Drivers, Utilities, Manual, Contact, and Specials tabs to display their respective menus. The following screen is for reference only. Click an icon to display Support DVD/ motherboard information Click an item to install If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to locate the file ASSETUP. EXE from the BIN folder. Double-click the ASSETUP. EXE to run the DVD. 1-28 ASUS MY CINEMA-PE9400COMBO E7361_P8H61-M2-TPM-SI R2. 0_Manua28 28 5/16/12 1:44:35 PM Chapter 2 BIOS information 2. 1 Managing and updating your BIOS Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. [. . . ] Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. [. . . ]