Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASUS P2B-IDE. We hope that this ASUS P2B-IDE user guide will be useful to you.
Lastmanuals help download the user guide ASUS P2B-IDE.
Detailed instructions for use are in the User's Guide.
[. . . ] IE302
IE302
III. INSTALLATION
This insert is to replace page 28 of your P2B manual (Manual 1. 03). [. . . ] Refer to the documentation of your hard disk for the jumper settings. BIOS now supports SCSI device or IDE CD-ROM bootup (see "HDD Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS Features Setup of the BIOS SOFTWARE) (Pin 20 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 20 plugged). TIP: You may configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector. You may install one operating system on an IDE drive and another on a SCSI drive and select the boot disk through BIOS Features Setup.
NOTE: Orient the red stripe to PIN 1
7. Primary / Secondary IDE Connectors (Two 40-1pin IDE) These connectors support the provided IDE hard disk ribbon cable. After connecting the single end to the board, connect the two plugs at the other end to your hard disk(s). If you install two hard disks, you must configure the second drive to Slave mode by setting its jumper accordingly. Refer to the documentation of your hard disk for the jumper settings. BIOS now supports SCSI device or IDE CD-ROM bootup (see "HDD Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS Features Setup of the BIOS SOFTWARE) (Pin 20 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 20 plugged). TIP: You may configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector. [. . . ] Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up.
IDELED
TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.
TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.
P2B IDE Activity LED
P2B IDE Activity LED
ASUS P2B User's Manual
28
ASUS P2B User's Manual
28
III. INSTALLATION Connectors
R R [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS P2B-IDE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS P2B-IDE will begin.
