User manual ASUS P2BD2

[. . . ] R P2B-D2 Dual Pentium II Motherboard ® USER'S MANUAL USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. [. . . ] This is important because if the DIT experiences any problems during initialization, iopsetup. exe will not work correctly, even though iopsetup. exe is running correctly. * To isolate the problem to either the DIT or iopsetup. exe, first disable your autoexec. bat file by renaming it (e. g. , autoexec. sav). If the problem occurs before the DOS prompt displays, then DIT is experiencing the problem, not iopsetup. exe since iopsetup. exe isn't running yet. If the problem occurs after the DOS prompt appears, start iopsetup. exe by typing "iopsetup main. htm". If the problem is experienced after iopsetup. exe is started, the problem could either be an iopsetup. exe problem or a DIT problem. * The following describes the DDM download and iRTOS upgrade capabilities of the Cyclone IQ80960RP and IQ80960RD66 boards: Board IQ80960RP IQ80960RD66 iRTOS upgrade Yes No DDM download No Yes WINDOWS NT 4. 0 A. I2O SAC Utility 80 NOTE: For the IQ80960RP board, the VPP switch and SW1 must be set to ON in order for iRTOS upgrade to work. To determine the capabilities for other hardware, please consult the board's documentation or contact the board manufacturer. ASUS P2B-D2 User's Manual WINDOWS NT 4. 0 B. Install Intel LAN Driver NOTE: Do not install the LAN driver directly from the P2B-D2 Support CD!You must copy all subdirectories and files that are under E:\LAN (assume E is the CDROM drive) to a floppy disk or hard disk and then install the LAN driver from it. Start system with the Windows NT 4. 0 installed. Copy all subdirectories and files that are under E:\LAN (assume E is the CDROM) to a floppy disk or hard disk. From "Start", point to Settings, and then click Control Panel. In Control Panel, double-click on the Network icon. Select Intel 82557-based 10/100 Ethernet PCI Adapter and then click Remove. NOTE: When you install Windows NT4. 0, it auto detects the Network card and will install the "Intel 82557-based 10/100 Ethernet PCI Adapter". However, this adapter will not work in NT4. 0, so you must "remove" this driver before you adding a new driver. The Select Network Adapter window appears. 7. Click Have disk. ASUS P2B-D2 User's Manual 81 WINDOWS NT 4. 0 B. Type the path to A:\LAN or C:\LAN, and then click OK. NOTE: You must copy all subdirectories and files that are under E:\LAN (assume E is the CD-ROM drive) to a floppy disk or hard disk. WINDOWS NT 4. 0 B. Select Intel EtherExpress PRO Adapter, and then click OK. [. . . ] If the user has made changes, ESC will prompt you to answer Y or N. Enter Y to go back to the left-hand screen and save, enter N to go back to left-hand screen and not save. If editing has not been made, ESC will send you back to the left hand menu without any messages. Notes A heading, *** BIOS Auto Detect *** appears on the right for each menu item on the left side that has been auto detected by the system BIOS. A heading, *** User Modified *** will appear on the right for menu items that have been modified by the user. ASUS P2B-D2 User's Manual 145 Appendix iv. [. . . ]