User manual ASUS P4P800-X

[. . . ] P4P800-X User Guide Motherboard E1718 Checklist First Edition July 2004 Copyright © 2003 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] ASUS CrashFree BIOS 2 - Updates the BIOS using a bootable floppy disk or the motherboard support CD. Refer to the corresponding sections for details on these utilities. Important notes · It is recommended that you save a copy of the original motherboard BIOS file to a bootable floppy disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using AFUDOS (refer to section "2. 1. 3 Using AFUDOS to copy BIOS from PC") Visit the ASUS website and download the latest BIOS file for this motherboard using the ASUS Update utility. · 2. 1. 1 Creating a bootable floppy disk 1. Do either one of the following to create a bootable floppy disk. DOS environment Insert a 1. 44 MB floppy disk into the drive. Windows® 98SE/ME/XP environment Insert a 1. 44 MB floppy disk into the floppy disk drive. From your Windows desktop, click on Start, then select My Computer. Click File from the menu, then select Format. A Format 3 1/2 Floppy Disk window appears. If you are using Windows® XP, select Create an MS-DOS startup disk from the format options field, then click Start. OR If you are using Windows® 98SE/ME, select Full option button from the format type, then click Start. Windows® 2000 environment To create a set of boot disks for Windows® 2000, run the Makeboot. exe tool from the Windows® 2000 CD: a. Insert a 1. 44 MB floppy disk into the floppy disk drive. Insert the Windows® 2000 CD into the CD-ROM drive. 2-2 Chapter 2: BIOS information c. From the Open box, type D:\bootdisk\makeboot a: then press <Enter>, assuming that D: is your CD-ROM drive. Copy the original (or the latest) motherboard BIOS to the bootable floppy disk. 2. 1. 2 Using AFUDOS to update the BIOS To update the BIOS using the AFUDOS. EXE utility: 1. Visit the ASUS website (www. asus. com) to download the latest BIOS file for your motherboard. Save the BIOS file to a bootable floppy disk. Write the BIOS file name on a piece of paper. You need to type the exact BIOS file name at the prompt. 2. Copy the AFUDOS. EXE utility from the support CD to the bootable floppy disk that contains the BIOS file. At the DOS prompt, type the command line: afudos /i[filename] where [filename] means the latest (or original) BIOS file that you copied to the bootable floppy disk. The succeeding screen displays the status of the update process. The BIOS information on the screen is for reference only. [. . . ] The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Ok] to save changes and exit. If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting. Pressing <Enter> saves the changes while exiting. Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. [. . . ]