User manual ASUS P5GDC-V DELUXE

[. . . ] P5GDC-V Deluxe Motherboard E1716 Revised Edition V2 July 2004 Copyright © 2004 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] done Search bootblock version: 0% 100% Advance Check. . . . . . . . . done Please restart your computer A:\> 121098765432109876543210987654321 121098765432109876543210987654321 1 121098765432109876543210987654321 12109876543210987654321098765432 4. 1. 4 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file. · · Prepare the motherboard support CD or the floppy disk containing the updated motherboard BIOS before using this utility. Make sure that you rename the original or updated BIOS file in the floppy disk to P 5 G D C V D . R O M M. Recovering the BIOS from a floppy disk To recover the BIOS from a floppy disk: 1. Insert the floppy disk with the original or updated BIOS file to the floppy disk drive. ASUS P5GDC-V Deluxe 4-5 3. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Bad BIOS checksum. Checking for floppy. . . When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file. Bad BIOS checksum. Start flashing. . . DO NOT shut down or reset the system while updating the BIOS!Doing so can cause system boot failure! 4. Restart the system after the utility completes the updating process. Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Remove any floppy disk from the floppy disk drive, then turn on the system. Insert the support CD to the optical drive. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Bad BIOS checksum. Checking for floppy. . . When no floppy disk is found, the utility automatically checks the optical drive for the original or updated BIOS file. The utility then updates the corrupted BIOS file. Bad BIOS checksum. Start flashing. . . 4-6 Chapter 4: BIOS setup DO NOT shut down or reset the system while updating the BIOS!Doing so can cause system boot failure! 4. Restart the system after the utility completes the updating process. The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www. asus. com) to download the latest BIOS file. 4. 1. 5 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. The ASUS Update utility allows you to: · Save the current BIOS file · Download the latest BIOS file from the Internet · Update the BIOS from an updated BIOS file · Update the BIOS directly from the Internet, and · View the BIOS version information. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. Click the U t i l i t i e s tab, then click I n s t a l l A S U S U p d a t e X. X X See page 5-3 for the U t i l i t i e s screen menu. [. . . ] From the IT8212 Setup Utility screen, press <4>. The following screen appears. IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Rebuild RAID Menu ] Array No Array 0 Array 1 Array 2 Array 3 Array Mode Stripe Mirror ------Drive No 4 2 ------Size(MB) XXXXXX XXXX --------Status Functional Functional --------- : Capacity (GB) [] Up [] Down [Enter] Select : Bootable Array [ESC] Exit 2. Use the up or down arrow keys to select a RAID array, then press <Enter> to rebuild. The following screen appears. IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [. . . ]