User manual ASUS P5KPL-C/1600

[. . . ] User Guide VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003 Jun 13 2007 Revision 1. 1e User Guide VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003 Revision History Rev 1. 1e Date Jun. 13. 07 Initial PW Note Initial public release User Guide VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003 Table of Contents Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 List of Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Channels Display: On the right of the peak meter, there is a display showing the number of audio channels that is being used in the system. The number of channels can be changed in the speaker configuration panel. Peak Meter: The volume peak meter is located to the left of the channel display. The number of peak meters changes according to the number of channels used in the system. S/PDIF Output Status: The S/PDIF output status is located to the right of the Channel Display. If "Digital PCM" is shown, that indicates the audio system will allow a PCM music stream output from the S/PDIF output jack. Bass Management Indicator: The Bass Management Indicator is located below the Channel Display. If it is enabled, "BM" will be visible. Notice that the "Bass Management" and "Equalizer" functions can not be enabled at the same time. Equalizer Indicator: The Equalizer Indicator is located to the right of the Bass Management Indicator. If it is enabled, "EQ" will be visible. As mentioned earlier, the Equalizer and Bass Management functions can not be enabled at the same time. Configuration Panels: On the bottom of the top panel, there is a row of buttons. When any of the buttons are activated (except the "Power" button), the bottom panel expands to show the selected panel. Power Button: When the Power button is activated, Adeck will hide itself in the system tray. Volume Control Mute S/PDIF Output Status Speaker Peak Meter Open Middle Panel Channel Number Figure 3 - Top Panel Power Equalizer Bass Management User Guide VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003 10 Bottom Panel The Bottom Panel is beneath the top panel. The contents of the Bottom Panel are dependent upon the button that activated to it. Even if the Bottom Panel is already expanded, the contents can still be changed by selecting another button from the bottom of the Top Panel. Speaker Configuration Panel: As Figure 4 shows, it contains the channel configuration and output volume control. To test a speaker to see if it is connected, single-click on the desired speaker. To test all speakers, just click the Test button. Mixer Configuration Panel: As Figure 7 shows, it contains the basic Playback Mixer and Recording Mixer volume controls. Additionally, the user can select which playback or recording device to be active. Effects Configuration Panel: As Figure 11 shows, there are two sound enhancement functions that can be selected: "Equalizer" or "Bass Management". [. . . ] The "Redirected Headphone" feature enables the user to hear the same audio that is being channeled to the front speakers. In this mode, once the headphone has been inserted the audio will be redirected from the speakers to the headphone. Please note that the "Independent Headphone" function requires two channels. Therefore, only six channels will be available if "Independent Headphone" is being used. Figure 18 - Jack Configuration Panel - Headphone Configuration User Guide VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003 21 S/PDIF Configuration Panel The S/PDIF Configuration Panel enables the user to configure S/PDIF related control. [. . . ]