User manual ASUS P8B75-M LE PLUS

[. . . ] No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License ("GPL"), under the Lesser General Public License Version ("LGPL") and/or other Free Open Source Software Licenses. [. . . ] Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend to always shut down the system properly from the operating system. ⷠThe BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. Com to download the latest BIOS file for this motherboard. ⷠEnsure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program. ⷠIf the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. 9 Jumpers for information on how to erase the RTC RAM. BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. 2-6 Chapter 2: BIOS information EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press F7 hot key for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Selects the display language of the BIOS setup program Displays the CPU/motherboard temperature, CPU/5V/3. 248V Fan Speed CPU_FAN CHA_FAN2 3325RPM N/A CHA_FAN1 N/A Speed : 3300 MHz Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Exit/Advanced Mode English System Performance Quiet Performance Energy Saving Normal Boot Priority Use the mouse to drag or keyboard to navigate to decide the boot priority. Shortcut (F3) Advanced Mode(F7) Boot Menu(F8) Default(F5) Quick access to a few utilities and advanced settings Selects the boot device priority Power Saving mode Normal mode Displays the system properties of the selected mode on the right hand side Loads optimized default ASUS Optimal mode Selects the boot device priority Enters the Advanced Mode · The boot device options vary depending on the devices you installed to the system. ⷠThe Boot Menu(F8) button is available only when the boot device is installed to the system. ASUS P8B75-M LE Series 2-7 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. [. . . ] Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. iC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. [. . . ]