User manual ASUS P8H61-M LX

[. . . ] Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Ham burg, Germany declare that the product ( description of the apparatus, sy stem, installation to w hich it refers) Mother Boa rd GA -8ST667 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/ 336 EEC-E MC Directive o EN 55011 Limits an d methods of mea surement of radio d isturbance characte ristics of industrial, sci entific an d medical (ISM high frequen cy equipment o EN 55013 Limits an d methods of mea surement of radio d isturbance characte ristics of broadcast receivers and associated equip ment o EN 55014 Limits an d methods of mea surement of radio d isturbance characte ristics of household electrical appliances, portable tools and similar e lectrical apparatus o EN 55015 Limits an d methods of mea surement of radio d isturbance characte ristics of fluore scent lamp s and lumi naries o EN 55020 Immun ity from radio in terferen ce of broadcast receivers and associated equip ment T EN 55022 Limits an d methods of mea surement of radio d isturbance characte ristics of information technology e quipment o DIN VDE 0 855 o part 10 o part 12 Cable d distrib ution systems; Equi pment for receivi ng and/or distribution fr om sound and television signals o EN50091-2 EMC re quirements for uninterru ptible powe r systems (U PS) o ENV 55104 lmmuni ty requireme nts for hou sehold appliances tools an d similar apparatus o EN 55082-2 Generi c emission standard Part 2: Industrial environment o EN 55081-2 T EN 50082-1 Gener ic immun ity stan dard Par t 1: Residua l commercial and light i ndustry Generi c emission standard Part 2: Industrial environment T EN 50081-1 Generi c emission standard Part 1: Residua l commercial and light i ndustry o EN 61000-3-3* T EN 60555-3 Distur bances in su pply systems cause by household appliances and similar electrical equipment "Voltage fluctuations" o EN 61000-3-2* T EN 60555-2 Distur bances in su pply systems cause by household appliances and similar electrical equipment "Harmonics" T CE mark ing (EC conformi ty marking) The manufacturer a lso declares the conformity of above mentioned product with the actual requir ed safety standards in accorda nce with LVD 7 3/23 EEC o EN 60065 Safety requirements for mains o perated electronic and related apparatus for household and similar general use o EN 60950 Safety for information technology eq uipment including electrical bussiness equipment o EN 60335 Safety o f household and similar electrical appliances o EN 50091-1 General and Safety requirements for uninterru ptible power systems (UPS) Manufacturer/Importer Signature: (Sta mp) Timmy Huang Timmy Huang Date : Aug . 28, 2002 Na me : DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G. B. T. (U. S. A. ) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number: GA-8ST667 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15. 107(a) and Section 15. 109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. [. . . ] (Default Value) Set Game port address to 209. Midi Port Address This feature allows you to select the Midi port address or disable it. Disabled 300 330 Disable this function. Set Midi port address to 330. (Default Value) Midi Port IRQ 5 10 Set Midi Port IRQ to 5. (Default Value) GA-8ST667 Series Motherboard - 34 - English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Soft-Off by PWR_BTTN System After AC Back IRQ [3-7, 9-15], NMI ModemRingOn/WakeOnLan PME Event Wake Up Power On by Keyboard Power On by Mouse Resume by Alarm x Month Alarm x Day (of Month) x Time (hh:mm:ss) Power LED in S1 state : Move F5:Previous Values [S1(POS)] [Off] [Off] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] NA 0 0:0:0 [Blinking] ESC:Exit F1:General Help F6:Fail-Safe Defaults F7:Optimized Defaults Enter:Select +/-/PU/PD:Value F10:Save [S3] Set suspend type to Suspend to RAM under ACPI OS Item Help Menu Level [S1] Set suspend type to Power On Suspend under ACPI OS Figure 5: Power Management Setup ACPI Suspend Type S1(POS) S3(STR) Set ACPI suspend type to S1. (Default Value) Set ACPI suspend type to S3. Soft-off by PWR_BTTN Off Suspend User can press Power button to power off system instantly. (Default Value) User can press Power button for 4 seconds to power off system. System will enter suspend mode if button is pressed less than 4 seconds. - 35 - BIOS Setup English System after AC Back Off On Laststate When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system will be in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. IRQ [3-7, 9-15], NMI When IRQ[3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system gets into green mode. Disabled Enabled Disable monitor IRQ[3-7, 9-15] or NMI. (Default value) ModemRingOn/WakeOnLAN An incoming call via modem can awake the system from any suspend state or an input signal comes from the other client server on the LAN can awake the system from any suspend state. Disabled Enabled Disable Modem Ring on/wake on Lan function. 10X~24X It's depends on CPU Clock Ratio. Linear Frequency Control Disabled Enabled Disable this function. (Default value) Enable this function. CPU Clock (MHz) 100~355 Select CPU Clock to 100MHz~355MHz. Incorrect using it may cause your system broken. For power End-User use only! DRAM Clock (MHz) This feature allows you to adjust the DRAM frequency, When "Linear Frequency Control" is set to Enabled. Please set DRAM Clock according to your requirement. If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 100. If you use DDR333 DRAM module, please set "DRAM Clock(MHz)" to 166. Incorrect using it may cause your system broken. For power End-User use only! - 41 - BIOS Setup English AGP Clock (MHz) Please set AGP Clock according to your requirement. Incorrect using it may cause your system broken. For power End-User use only! PCI Clock (MHz) Please set PCI Clock according to your requirement. [. . . ] Cable with rear bracket is provided and could link to the "S/PDIF output" connector (As picture. ) For the further linkage to decoder, rear bracket provides coaxial cable and Fiber connecting port. 1. Connect the SPDIF output device to the rear bracket of PC, and fix it with screw. 2. Connect SPDIF wire to the motherboard. 3. Connect co-axial or optical output to the AC3 decoder. GA-8ST667 Series Motherboard - 74 - English - 75 - Technical Reference English GA-8ST667 Series Motherboard - 76 - Revision History Chapter 5 Appendix Picture below are shown in Windows XP (TUCD driver version 2. 1) Appendix A: SiS 645/645DX/648 Chipset Driver Installation A. [. . . ]