Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASUS PCIE-P54NP4. We hope that this ASUS PCIE-P54NP4 user guide will be useful to you.
Lastmanuals help download the user guide ASUS PCIE-P54NP4.
Detailed instructions for use are in the User's Guide.
[. . . ] Trademarks ASUS and ASUSTeK are registered trademarks of Computer Inc. AMD is a trademark of Advanced Micro Devices, Inc. DEC and Alpha are registered trademarks of DIGITAL Equipment Corporation in the U. S. Microsoft, Windows, Windows NT and MS-DOS are registered trademarks of Microsoft Corporation in the U. S. [. . . ] For remote management, see the appropriate section below. 4Starting the GUI RAID Manager for remote management via network 1. Turn on the local host and enable the appropriate SNMP service. For information on how to enable the SNMP service for Windows NT, Windows 95/98, or Novell NetWare, see their respective manuals. Check to ensure that the local host is properly connected on the network. Take note of its IP address (or SNMP agent's name) and community names.
3-2
3. 1
Starting the GUI RAID Manager
ASUS GUI RAID Manager: Basic Operations at Startup
3. Run the GUI RAID Manager on the remote station. If you are using Windows 95/98 or Windows NT 4. 0, follow these steps: 3a. From the Start menu, select Programs à ASUS GUI RAID Manager. -orDouble-click on the ASUS GUI RAID Manager icon. The ASUS GUI RAID Manager main window appears on the screen. Based on the previous figure, the entry should be PCI Bus #0 PCI Dev#12 Port:D000 Irq:11. The enabling of the toolbar buttons signifies a successful connection. 4Connecting to a SCSI-to-SCSI controller from the local host 1. -orClick on the Connect/Open command button. following submenu appears on the screen: The
3. 2
Connecting and Disconnecting from a Disk Array
3-5
ASUS GUI RAID Manager: Basic Operations at Startup
2. The Settings of RS-232 Interface dialog box appears:
3. From the COM Port# drop-down list box, select which COM port on the local host is connected to the controller via the RS-232 cable. To select a different COM port, click on the down-arrow button at the right of the box, then select the desired option. From the Baud Rate drop-down list box, select the baud rate setting on the RS-232 port of the controller. To select, perform the same procedure described in step 3. You can modify the baud rate on the controller through the on-board console interface or through the GUI RAID Manager. [. . . ] This combination of drives appears to the system as a single logical drive. RAID 1 is simple and easy to implement; however, it is more expensive as it doubles investment required for a non-redundant disk array implementation.
RAID 1
C-3
ASUS GUI RAID Manager: RAID Levels
Logical Drive Physical Disks Block 1 Block 2 Block 3 Block 4 Block 5 Block 6 Block 7 Block 8 . Mirroring Block 1 Block 2 Block 3 Block 4 . .
In addition to the data protection RAID 1 provides, this RAID level also improves performance. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS PCIE-P54NP4
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS PCIE-P54NP4 will begin.
