User manual ASUS RT-N11 QUICK START GUIDE

[. . . ] To access the RT-N11 Wireless Router, you must have the correct TCP/IP settings on your wired or wireless clients. The RT-N11 Wireless Router integrates DHCP server functions, thus, your PC gets an IP address automatically. To manually set the IP address, you need to know the default settings of the Wireless Router: · 0 To set up the connection with a manually assigned IP address, the address of your PC and the wireless router must be within the same subnet: Xxx (xxx can be any number between 2 and 254. [. . . ] This identifier emulates a password when a device attempts to communicate with your wireless router via WLAN. If you want to protect transmitted data, select any of the SecurityLevel below to enable encryption methods: Medium: Only users with the same WEP key settings can connect to your wireless router and transmit data using 64bits or 128bits WEP key encryption. configure the settings as Open System/WEP instead of Shared Key/WEP. High: Only users with the same WPA pre-shared key settings can connect to your wireless router and transmit data using TKIP encryption. Key in four sets of WEP keys in the WEP Key fields (10 hexadecimal digits for WEP 64bits, 26 hexadecimal digits for WEP 128bits). For system-generated keys, enter a Passphrase. Take note of the Passphrase and WEP keys, then click Finish. For example, if we select WEP 64bits encryption mode and key in 11111 as the Passphrase, the WEP Keys are generated automatically. To connect the wireless router from a wireless client, you can use Windows® Wireless Zero Configuration service to set up the connection. If you use ASUS Wireless Card on your computer, you can use the One Touch Wizard utility supplied in WLAN Card support CD for wireless connection. If you installed ASUS wireless card together with its utilities and drives on your PC, click Start ->Programs->ASUSUtility->WLANCard->OneTouchWizard to launch the One Touch Wizard utility. 3) Set the same authentication and encryption of your WLAN card with those at RT-N11. 4) It takes several seconds for the wireless card to associate with RT-N11. 5) Set up the IP address of the WLAN Card according to your network condition. [. . . ] Dac folosii servicii PPTP, select opinuea ADSL connection that requires username, password and IP address (conexiune ADSL care necesit nume de utilizator, parol i adres IP). Dac folosii ADSL sau un alt tip de conexiune care folosete o adres IP static, selectai opiunea ADSL or other connection type that uses static IP address (ADSL sau alt conexiune care folosete adresa IP static). Chei în 4 seturi de WEP keys în cîmpurile WEP key (10 cifre hexadecimale pentru cheia de 64 bii, 26 cifre hexadecimale pentru cheia de 128 bii). [. . . ]