User manual ASUS T2-P

[. . . ] Terminator 2 Barebone System Model T2-P User Guide MODE E1606 Revised Edition V4 April 2004 Copyright © 2004 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] Press the PLAY/PAUSE ( / ) button to assign the preset number to the radio station. 4. 5. 3. 5. 4 Adjusting the volume Press the ( +) button to increase the volume or the ( decrease the volume. ­) button to Connect a headphone or PC speakers to the rear or front panel Line Out port for audio output. 60 Chapter 3: Starting up 3. 6 ASUS Wireless LAN adapter The 3-in-1 PCI upgrade package for the Terminator 2 system comes with an IEEE 802. 11b-compliant wireless LAN adapter for wireless local area network (WLAN). The 3-in-1 PCI upgrade package is purchased separately. Features The wireless LAN adapter gives you freedom to connect to a wired or wireless local area network and the Internet without the wires and cables. Employing the Direct Sequence Spread Spectrum (DSSS) technology, the wireless LAN adapter is capable of transmitting and receiving signals through radio waves on the 2. 4 GHz band. Below are other wireless LAN adapter features: · · · · · · · Reliable data transfer rates of up to 11Mbps with automatic fallback to 5. 5, 2, and 1Mbps Secure data transmission via Wired Equivalent Privacy (WEP) encryption Operating distance of up to 100 ft (30 m) indoors Easy installation and full software support Supports Infrastructure (wireless LAN adapter to access point) and Ad-hoc (wireless LAN adapter to other wireless clients) network types Windows® 2000/XP compatible Stand-alone dipolar antenna The wireless LAN adapter operating distance may be shorter if there are walls, barriers, or interferences in the home layout or operating environment. ASUS Terminator 2 barebone system 61 3. 6. 1 LED indicators The wireless LAN adapter comes with a Data Transmission (Green AIR) and Network Link (Yellow LINK) LED indicators. Refer to the table below for LED indications. AIR Fast Blink ON OFF Blink AIR LED LINK LED LINK ON ON OFF OFF Indications The wireless LAN adapter is on and is transmitting/receiving data. The wireless LAN adapter is on but no data activity. The wireless LAN adapter is off or disabled. The wireless LAN adapter is not connected to a wireless network. 3. 6. 2 Antenna installation Connect the dipolar antenna to the antenna connector (male) of the wireless LAN adapter before installing the device drivers and utilities. Place the antenna at an elevated location to receive or transmit better signal. Do not place the antenna under your table or in a closed compartment. 62 Chapter 3: Starting up 3. 6. 3 Installing the utilities and driver To install the Wireless LAN adapter driver and the Control Center utility to the Terminator 2 system: 1. Insert the support CD to the optical drive. In the Drivers window, Click the ASUS Wireless LAN Adapter Driver item. Click Install ASUS WLAN Card Utilities/Driver to begin installation. 3. 3. 6. 4 Other support CD options Uninstall ASUS WLAN Card Utilities/ Driver. Click this option to uninstall the WLAN Card utilities and driver from the system. Click to view the user handbook, installation, and quick setup guides in PDF format. Click this option to install the WiFi@HOME screen savers to the Terminator 2 system. Click this option to explore the support CD contents. Click this option to visit the ASUS website. This option allows you to change the installation language. Click the arrow to display available installation languages. Click EXIT to close the installation window. Refer to the ASUS Wireless LAN Adapter user guide in the support CD for details. You may access the user guide by clicking the Read/Install User Documentation from the wireless LAN adapter installation window. ASUS Terminator 2 barebone system 63 3. 6. 5 The Control Center utility The Control Center utility is a management software that launches applications and configures network settings. [. . . ] The User Password item now shows Installed. To change the user password, follow the same steps as in setting a user password. 124 Chapter 5: BIOS setup Clear User Password Select this item if you wish to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. [. . . ]