User manual ASUS TS500-E5

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Being a menu-driven program, it lets you scroll through the various sub-menus and make your selections from the available options using the navigation keys. · The default BIOS settings for this motherboard apply for most conditions to ensure optimum performance. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. Select the L o a d S e t u p D e f a u l t s item under the Exit Menu. See section "4. 8 Exit Menu. " The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. Visit the ASUS website (www. asus. com) to download the latest BIOS file for this motherboard. · · 4-10 Chapter 4: BIOS setup 4. 2. 1 BIOS menu screen Configuration fields BIOS SETUP UTILITY Security Boot Menu items Menu bar General help Main Advanced Server Exit Use [ENTER]. [TAB], or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. System Overview System Time System Date Legacy Diskette A IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Tertiary IDE Master Fourth IDE Master System Information [11:10:19] [Thu 04/21/2005] [1. 44M, 3. 5 in] [Not [Not [Not [Not [Not [Not Detected] Detected] Detected] Detected] Detected] Detected] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02. 58 (C)Copyright 1985-2004, American Megatrends, Inc. Sub-menu items Navigation keys 4. 2. 2 Menu bar For changing the basic system configuration For changing the advanced system settings For changing the server settings For changing the security settings For changing the system boot configuration For selecting the exit options and loading default settings The menu bar on top of the screen has the following main items: Main Advanced Server Security Boot Exit To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. 4. 2. 3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. ASUS NCLV-D2 Series 4-11 4. 2. 4 Menu items Main Advanced Server BIOS SETUP UTILITY Security Boot Exit Use [ENTER], [TAB], or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. The highlighted item on the menu bar displays the specific items for that menu. For example, selecting M a i n shows the Main menu items. The other items (Advanced, Server, Security, Boot, and Exit) on the menu bar have their respective menu items. System Time System Date Legacy Diskette A IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Teritary IDE Master Fourth IDE Master System Information [11:10:19] [Thu 04/21/2005] [1. 44M, 3. 5 in] : [Not : [Not : [Not : [Not : [Not : [Not Detected] Detected] Detected] Detected] Detected] Detected] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit Main menu items 4. 2. 5 Sub-menu items A solid triangle before each item on any menu screen means that the iteam has a sub-menu. These items show N/A if no IDE device is installed in the system. Type [Auto] Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD] LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-sector Transfer) [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] ASUS NCLV-D2 Series 4-15 PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. [. . . ] x k e r n e l s the driver is installed in: s, /lib/modules/<kernel_version>/net/bcm5700. o For 2 . x k e r n e l s the driver is installed in: s, /lib/modules/<kernel_version>/kernel/drivers/net/ bcm5700. o For 2 . x k e r n e l s w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n the driver n, is installed in: /lib/modules/<kernel_version>/kernel/drivers/net/bcm/ bcm5700. o or /lib/modules/<kernel_version>/kernel/drivers/addon/ bcm5700/bcm5700. o 4. Load the driver: insmod bcm5700 Refer to Linux distribution documentation to configure the network protocol and address. 6-12 Chapter 6: Driver installation Building the driver from the TAR file To build the driver from the TAR file: 1. [. . . ]