User manual ASUS U3S EXPRESS GATE QUICK START GUIDE

[. . . ] Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for ASUS products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Press f8 to accept the agreement and continue. The "Setup" page is displayed. Press esc to continue installing a new copy of the operating system instead of repairing it. Press enter to set up the operating system. Press C to continue setup using this partition. Select Format the partition using the NTFS file system (Quick), and then press enter. Ä Formatting this drive deletes all current files. 12. This process takes 1 to 2 hours to complete. The computer restarts in Windows when the process is complete. Maintenance and Service Guide 3­13 Software Update and Recovery Reinstalling Device Drivers and Other Software After the operating system installation process is complete, you must reinstall drivers. To reinstall drivers, use the Recovery disc included with the computer: 1. While running Windows, insert the Recovery disc into the optical drive. Then type D:\SWSETUP\APPINSTL\SETUP. EXE where D indicates the optical drive. Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, the discharge contains enough power to alter device parameters or melt silicon junctions. A sudden discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry. Often the spark is neither felt nor heard, but damage occurs. An electronic device exposed to electrostatic discharge might not be affected at all and can work perfectly throughout a normal cycle. Or the device might function normally for a while, then degrade in the internal layers, reducing its life expectancy. 5­4 Maintenance and Service Guide Removal and Replacement Preliminaries 5. 5 Packaging and Transporting Precautions Use the following grounding precautions when packaging and transporting equipment: To avoid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. Protect all electrostatic-sensitive parts and assemblies with conductive or approved containers or packaging. Keep electrostatic-sensitive parts in their containers until the parts arrive at static-free workstations. Place items on a grounded surface before removing items from their containers. Always be properly grounded when touching a sensitive component or assembly. Store reusable electrostatic-sensitive parts from assemblies in protective packaging or nonconductive foam. [. . . ] Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) at http://www. eiae. org. Maintenance and Service Guide D­1 Display Component Recycling This appendix provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight 1 and the liquid crystal display (LCD) panel 2. procedures differ from Disassembly procedures provided in one display assembly to another. The this appendix are general disassembly instructions. [. . . ]