User manual ASUS UL50A

[. . . ] Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] Select the appropriate Authentication Type. Please contact your network administrator if configuration of this setting is required. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click the Connect button to connect to the network. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. 6. Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. Set the IP address as follows: 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. Identifiability can be enhanced by entering the model number, the user name, and other factors. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection: Assign the name of the work group to be accessed. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. then click the [OK] button. Skip to "Setting filesharing function". The [Select Network Component Type] window will be displayed. Click [Service], then click the [Add] button. The [Select Network Service] window will be displayed. Click [File and Printer Sharing for Microsoft Networks] and then click the [OK] button. [. . . ] Some features of the standard include support for up to 127 concurrent USB devices, dynamic insertion and removal of devices, and self-identifying peripheral configuration for true plug-and-play functionality. USB 1. 0 connects external devices at up to 11 Mbps. USB 2. 0 is backward-compatible with USB 1. 0 devices to allow you to connect older devices to the ports. A video display standard originally introduced by IBM with the PS/2 series of personal computers. [. . . ]